cy_stc_ctb_config_t Struct Reference

Description

Configuration structure to set up the entire CTB to be used with Cy_CTB_Init.

Data Fields
cy_en_ctb_deep_sleep_t	deepSleep
	Enable or disable the CTB during Deep Sleep.
cy_en_ctb_power_t	oa0Power
	Opamp0 power mode: off, low, medium, or high.
cy_en_ctb_mode_t	oa0Mode
	Opamp0 usage mode: 1x drive, 10x drive, or as a comparator.
cy_en_ctb_pump_t	oa0Pump
	Opamp0 charge pump: enable to increase input range for rail-to-rail operation.
cy_en_ctb_comp_edge_t	oa0CompEdge
	Opamp0 comparator edge detection: disable, rising, falling, or both.
cy_en_ctb_comp_level_t	oa0CompLevel
	Opamp0 comparator DSI (trigger) output: pulse or level.
cy_en_ctb_comp_bypass_t	oa0CompBypass
	Opamp0 comparator DSI (trigger) output synchronization.
cy_en_ctb_comp_hyst_t	oa0CompHyst
	Opamp0 comparator hysteresis: enable for 10 mV hysteresis.
bool	oa0CompIntrEn
	Opamp0 comparator interrupt enable.
cy_en_ctb_power_t	oa1Power
	Opamp1 power mode: off, low, medium, or high.
cy_en_ctb_mode_t	oa1Mode
	Opamp1 usage mode: 1x drive, 10x drive, or as a comparator.
cy_en_ctb_pump_t	oa1Pump
	Opamp1 charge pump: enable to increase input range for rail-to-rail operation.
cy_en_ctb_comp_edge_t	oa1CompEdge
	Opamp1 comparator edge detection: disable, rising, falling, or both.
cy_en_ctb_comp_level_t	oa1CompLevel
	Opamp1 comparator DSI (trigger) output: pulse or level.
cy_en_ctb_comp_bypass_t	oa1CompBypass
	Opamp1 comparator DSI (trigger) output synchronization.
cy_en_ctb_comp_hyst_t	oa1CompHyst
	Opamp1 comparator hysteresis: enable for 10 mV hysteresis.
bool	oa1CompIntrEn
	Opamp1 comparator interrupt enable.
bool	configRouting
	Configure or ignore routing related registers.
uint32_t	oa0SwitchCtrl
	Opamp0 routing control.
uint32_t	oa1SwitchCtrl
	Opamp1 routing control.
uint32_t	ctdSwitchCtrl
	Routing control between the CTDAC and CTB blocks.