Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- a -

• ANGLE_360_VAL : tle5012b_util.hpp
• ANGLE_SPEED_ERROR : tle5012b_util.hpp
• application_start() : writeRegisters.hpp , writeRegisters.cpp , useMultipleSensors.hpp , useMultipleSensors.cpp , testSensorMainValues.hpp , testSensorMainValues.cpp , sensorType.hpp , sensorType.cpp , sensorRegisters.hpp , sensorRegisters.cpp , readSpeedProcessing.hpp , readSpeedProcessing.cpp , readMultipleRegisters.hpp , readMultipleRegisters.cpp , readAngleValueProcessing.hpp , readAngleValueProcessing.cpp , readAngleTest.hpp , readAngleTest.cpp , readAngleSpeedRevolutions.hpp , readAngleSpeedRevolutions.cpp , E9000SPC.hpp , E9000SPC.cpp

- c -

• calculateAngleSpeed() : TLE5012b.cpp
• CHANGE_UINT_TO_INT_15 : tle5012b_util.hpp
• CHANGE_UNIT_TO_INT_9 : tle5012b_util.hpp
• CHECK_BIT_14 : tle5012b_util.hpp
• CHECK_BIT_9 : tle5012b_util.hpp
• checkError : sensorType.cpp , writeRegisters.cpp , useMultipleSensors.cpp , testSensorMainValues.cpp , sensorRegisters.cpp , readSpeedProcessing.cpp , readMultipleRegisters.cpp , readAngleValueProcessing.cpp , readAngleTest.cpp , readAngleSpeedRevolutions.cpp , E9000SPC.cpp
• command : readMultipleRegisters.cpp
• crc8() : TLE5012b.cpp
• CRC_ERROR : tle5012b_util.hpp
• CRC_NUM_REGISTERS : tle5012b_util.hpp
• CRC_POLYNOMIAL : tle5012b_util.hpp
• CRC_SEED : tle5012b_util.hpp
• crcCalc() : TLE5012b.cpp
• CS_PIN_SENSOR_1 : useMultipleSensors.cpp
• CS_PIN_SENSOR_2 : useMultipleSensors.cpp

- d -

• d : useMultipleSensors.cpp
• DELETE_7BITS : tle5012b_util.hpp
• DELETE_BIT_15 : tle5012b_util.hpp

- e -

• errorTypes : tle5012b_util.hpp

- g -

• GET_BIT_14_4 : tle5012b_util.hpp
• getFirstByte() : TLE5012b.cpp
• getSecondByte() : TLE5012b.cpp

- h -

• hsmInterface() : sensorType.cpp

- i -

• IFA : E9000SPC.cpp
• iifInterface() : sensorType.cpp
• INTERFACE_ACCESS_ERROR : tle5012b_util.hpp
• INTERFACE_ERROR_MASK : tle5012b_util.hpp
• INV_ANGLE_ERROR_MASK : tle5012b_util.hpp
• INVALID_ANGLE_ERROR : tle5012b_util.hpp

- l -

• leng : readMultipleRegisters.cpp
• loop() : E9000SPC.cpp , readAngleSpeedRevolutions.cpp , readAngleTest.cpp , readAngleValueProcessing.cpp , readMultipleRegisters.cpp , readSpeedProcessing.cpp , sensorRegisters.cpp , sensorType.cpp , testSensorMainValues.cpp , useMultipleSensors.cpp , writeRegisters.cpp

- m -

• MAX_NUM_REG : tle5012b_util.hpp
• MAX_REGISTER_MEM : tle5012b_util.hpp
• MAX_SLAVE_NUM : spi3w-ino.hpp

- n -

• NO_ERROR : tle5012b_util.hpp

- p -

• PIN_SPI_EN : TLE5012-pal-ino.hpp , TLE5012-pal-wiced.hpp
• POW_2_15 : tle5012b_util.hpp
• POW_2_7 : tle5012b_util.hpp
• PRINTBIN : TLE5012-platf-ino.hpp , TLE5012-platf-wiced.hpp
• PRINTBINS : TLE5012-platf-ino.hpp , TLE5012-platf-wiced.hpp
• pwmInterface() : sensorType.cpp

- r -

• r : useMultipleSensors.cpp
• READ_BLOCK_CRC : tle5012b_util.hpp
• READ_SENSOR : tle5012b_util.hpp

- s -

• s : writeRegisters.cpp , readMultipleRegisters.cpp
• SAFE_high : tle5012b_util.hpp
• SAFE_low : tle5012b_util.hpp
• safetyTypes : tle5012b_util.hpp
• sensor : useMultipleSensors.cpp
• SENSOR_NUM : useMultipleSensors.cpp
• setup() : readSpeedProcessing.cpp , writeRegisters.cpp , useMultipleSensors.cpp , testSensorMainValues.cpp , sensorType.cpp , sensorRegisters.cpp , readMultipleRegisters.cpp , readAngleValueProcessing.cpp , readAngleTest.cpp , readAngleSpeedRevolutions.cpp , E9000SPC.cpp
• show_ACSTAT() : sensorRegisters.cpp
• show_ADC() : sensorRegisters.cpp
• show_additional() : sensorType.cpp
• show_bin() : sensorRegisters.cpp , sensorType.cpp
• show_identity() : sensorType.cpp
• show_IFAB() : sensorRegisters.cpp
• show_MAINA() : sensorRegisters.cpp
• show_MOD1() : sensorRegisters.cpp
• show_MOD2() : sensorRegisters.cpp
• show_MOD3() : sensorRegisters.cpp
• show_MOD4() : sensorRegisters.cpp
• show_OFFSETS() : sensorRegisters.cpp
• show_SIL() : sensorRegisters.cpp
• show_STAT() : sensorRegisters.cpp
• show_TCOTY() : sensorRegisters.cpp
• spcInterface() : sensorType.cpp
• SPEED : spi3w-ino.hpp
• SPI3W : spi3w-ino.hpp
• SPI3W_ARD : spi3w-ino.hpp
• SPI3W_INO : spi3w-ino.hpp
• SPI3W_XMC : spi3w-ino.hpp
• SYSTEM_ERROR : tle5012b_util.hpp
• SYSTEM_ERROR_MASK : tle5012b_util.hpp

- t -

• t_mlow : E9000SPC.cpp
• TEMP_DIV : tle5012b_util.hpp
• TEMP_OFFSET : tle5012b_util.hpp
• TLE5012_FRMWK_ARDUINO : tle5012-conf-opts.hpp
• TLE5012_FRMWK_MTB : tle5012-conf-opts.hpp
• TLE5012_FRMWK_PSOC : tle5012-conf-opts.hpp
• TLE5012_FRMWK_WICED : tle5012-conf-opts.hpp
• Tle5012Sensor : readAngleValueProcessing.cpp , writeRegisters.cpp , testSensorMainValues.cpp , sensorType.cpp , sensorRegisters.cpp , readSpeedProcessing.cpp , readMultipleRegisters.cpp , readAngleTest.cpp , readAngleSpeedRevolutions.cpp , E9000SPC.cpp
• TLE94112_PIN_CS1 : TLE5012-pal-wiced.hpp
• TRIGGER_DELAY : tle5012b_util.hpp
• triggerTime : E9000SPC.cpp

- u -

• unitTime : E9000SPC.cpp
• UNUSED_PIN : gpio-arduino.hpp , gpio-mtb.hpp , gpio-wiced.hpp
• upd : E9000SPC.cpp , testSensorMainValues.cpp
• UPD_high : tle5012b_util.hpp
• UPD_low : tle5012b_util.hpp
• updTypes : tle5012b_util.hpp

- w -

• WRITE_SENSOR : tle5012b_util.hpp