MTB CAT1 Peripheral driver library

General Description

Enumerations

enum  cy_en_clkbak_lpeco_loadcap_range_t {
  CY_SYSCLK_BAK_LPECO_LCAP_5TO10PF = 0u,
  CY_SYSCLK_BAK_LPECO_LCAP_10TO15PF = 1u,
  CY_SYSCLK_BAK_LPECO_LCAP_15TO20PF = 2u,
  CY_SYSCLK_BAK_LPECO_LCAP_20TO25PF = 3u
}
 Backup domain LPECO load capacitance range. More...
 
enum  cy_en_clkbak_lpeco_frequency_range_t {
  CY_SYSCLK_BAK_LPECO_FREQ_4TO6MHZ = 0u,
  CY_SYSCLK_BAK_LPECO_FREQ_6TO8MHZ = 1u
}
 Backup domain LPECO crystal frequency range. More...
 
enum  cy_en_clkbak_lpeco_max_amplitude_t {
  CY_SYSCLK_BAK_LPECO_AMP_MAX_1P35V = 0u,
  CY_SYSCLK_BAK_LPECO_AMP_MAX_1P8V = 1u
}
 Backup domain LPECO crystal oscillation amplitude. More...
 
enum  cy_en_clkbak_lpeco_amplitude_detect_t {
  CY_SYSCLK_BAK_LPECO_AMPDET_INIT_EN = 0u,
  CY_SYSCLK_BAK_LPECO_AMPDET_ALWAYS_EN = 1u
}
 Backup domain LPECO minimum amplitude detection. More...
 

Enumeration Type Documentation

◆ cy_en_clkbak_lpeco_loadcap_range_t

Backup domain LPECO load capacitance range.

Note
This enum is available for TVIIC devices.
Enumerator
CY_SYSCLK_BAK_LPECO_LCAP_5TO10PF 

Backup domain LPECO load is in range [5pF, 10pF].

CY_SYSCLK_BAK_LPECO_LCAP_10TO15PF 

Backup domain LPECO load is in range (10pF, 15pF].

CY_SYSCLK_BAK_LPECO_LCAP_15TO20PF 

Backup domain LPECO load is in range (15pF, 20pF].

CY_SYSCLK_BAK_LPECO_LCAP_20TO25PF 

Backup domain LPECO load is in range (20pF, 25pF].

◆ cy_en_clkbak_lpeco_frequency_range_t

Backup domain LPECO crystal frequency range.

Note
This enum is available for TVIIC devices.
Enumerator
CY_SYSCLK_BAK_LPECO_FREQ_4TO6MHZ 

Backup domain LPECO frequency is in range [4MHz, 6MHz)

CY_SYSCLK_BAK_LPECO_FREQ_6TO8MHZ 

Backup domain LPECO frequency is in range [6MHz, 8MHz].

◆ cy_en_clkbak_lpeco_max_amplitude_t

Backup domain LPECO crystal oscillation amplitude.

Note
This enum is available for TVIIC devices.
Enumerator
CY_SYSCLK_BAK_LPECO_AMP_MAX_1P35V 

Backup domain LPECO maximum amplitude is 1.35V.

This is the lowest power setting.

CY_SYSCLK_BAK_LPECO_AMP_MAX_1P8V 

Backup domain LPECO maximum amplitude is 1.8V.

This is the lowest jitter setting.

◆ cy_en_clkbak_lpeco_amplitude_detect_t

Backup domain LPECO minimum amplitude detection.

Note
This enum is available for TVIIC devices.
Enumerator
CY_SYSCLK_BAK_LPECO_AMPDET_INIT_EN 

Initially enabled, and then automatically disabled when amplitude detector detects sufficient amplitude.

CY_SYSCLK_BAK_LPECO_AMPDET_ALWAYS_EN 

Keep minimum amplitude detector enabled as long as LPECO is enabled.