MTB CAT1 Peripheral driver library

General Description

Functions

void Cy_SCB_UART_StartRingBuffer (CySCB_Type *base, void *buffer, uint32_t size, cy_stc_scb_uart_context_t *context)
 Starts the receive ring buffer operation. More...
 
void Cy_SCB_UART_StopRingBuffer (CySCB_Type *base, cy_stc_scb_uart_context_t *context)
 Stops receiving data into the ring buffer and clears the ring buffer. More...
 
uint32_t Cy_SCB_UART_GetNumInRingBuffer (CySCB_Type const *base, cy_stc_scb_uart_context_t const *context)
 Returns the number of data elements in the ring buffer. More...
 
void Cy_SCB_UART_ClearRingBuffer (CySCB_Type const *base, cy_stc_scb_uart_context_t *context)
 Clears the ring buffer. More...
 
cy_en_scb_uart_status_t Cy_SCB_UART_Receive (CySCB_Type *base, void *buffer, uint32_t size, cy_stc_scb_uart_context_t *context)
 This function starts a UART receive operation. More...
 
void Cy_SCB_UART_AbortReceive (CySCB_Type *base, cy_stc_scb_uart_context_t *context)
 Abort the current receive operation by clearing the receive status. More...
 
uint32_t Cy_SCB_UART_GetReceiveStatus (CySCB_Type const *base, cy_stc_scb_uart_context_t const *context)
 Returns the status of the receive operation. More...
 
uint32_t Cy_SCB_UART_GetNumReceived (CySCB_Type const *base, cy_stc_scb_uart_context_t const *context)
 Returns the number of data elements received since the last call to Cy_SCB_UART_Receive. More...
 
cy_en_scb_uart_status_t Cy_SCB_UART_Transmit (CySCB_Type *base, void *buffer, uint32_t size, cy_stc_scb_uart_context_t *context)
 This function starts a UART transmit operation. More...
 
void Cy_SCB_UART_AbortTransmit (CySCB_Type *base, cy_stc_scb_uart_context_t *context)
 Aborts the current transmit operation. More...
 
uint32_t Cy_SCB_UART_GetTransmitStatus (CySCB_Type const *base, cy_stc_scb_uart_context_t const *context)
 Returns the status of the transmit operation. More...
 
uint32_t Cy_SCB_UART_GetNumLeftToTransmit (CySCB_Type const *base, cy_stc_scb_uart_context_t const *context)
 Returns the number of data elements left to transmit since the last call to Cy_SCB_UART_Transmit. More...
 

Function Documentation

◆ Cy_SCB_UART_StartRingBuffer()

void Cy_SCB_UART_StartRingBuffer ( CySCB_Type base,
void *  buffer,
uint32_t  size,
cy_stc_scb_uart_context_t context 
)

Starts the receive ring buffer operation.

The RX interrupt source is configured to get data from the RX FIFO and put into the ring buffer.

Parameters
baseThe pointer to the UART SCB instance.
bufferPointer to the user defined ring buffer. The element size is defined by the data type, which depends on the configured data width.
sizeThe size of the receive ring buffer. Note that one data element is used for internal use, so if the size is 32, then only 31 data elements are used for data storage.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.
Note
  • The buffer must not be modified and stay allocated while the ring buffer operates.
  • This function overrides the RX interrupt sources and changes the RX FIFO level.

◆ Cy_SCB_UART_StopRingBuffer()

void Cy_SCB_UART_StopRingBuffer ( CySCB_Type base,
cy_stc_scb_uart_context_t context 
)

Stops receiving data into the ring buffer and clears the ring buffer.

Parameters
baseThe pointer to the UART SCB instance.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.

◆ Cy_SCB_UART_GetNumInRingBuffer()

uint32_t Cy_SCB_UART_GetNumInRingBuffer ( CySCB_Type const *  base,
cy_stc_scb_uart_context_t const *  context 
)

Returns the number of data elements in the ring buffer.

Parameters
baseThe pointer to the UART SCB instance.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.
Returns
The number of data elements in the receive ring buffer.
Note
One data element is used for internal use, so when the buffer is full, this function returns (Ring Buffer size - 1).

◆ Cy_SCB_UART_ClearRingBuffer()

void Cy_SCB_UART_ClearRingBuffer ( CySCB_Type const *  base,
cy_stc_scb_uart_context_t context 
)

Clears the ring buffer.

Parameters
baseThe pointer to the UART SCB instance.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.

◆ Cy_SCB_UART_Receive()

cy_en_scb_uart_status_t Cy_SCB_UART_Receive ( CySCB_Type base,
void *  buffer,
uint32_t  size,
cy_stc_scb_uart_context_t context 
)

This function starts a UART receive operation.

It configures the receive interrupt sources to get data available in the receive FIFO and returns. The Cy_SCB_UART_Interrupt manages the further data transfer.

If the ring buffer is enabled, this function first reads data from the ring buffer. If there is more data to receive, it configures the receive interrupt sources to copy the remaining bytes from the RX FIFO when they arrive.

When the receive operation is completed (requested number of data elements received) the CY_SCB_UART_RECEIVE_ACTIVE status is cleared and the CY_SCB_UART_RECEIVE_DONE_EVENT event is generated.

Parameters
baseThe pointer to the UART SCB instance.
bufferPointer to buffer to store received data. The element size is defined by the data type, which depends on the configured data width.
sizeThe number of data elements to receive.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.
Returns
cy_en_scb_uart_status_t
Note
  • The buffer must not be modified and stay allocated until end of the receive operation.
  • This function overrides the RX interrupt sources and changes the RX FIFO level.

◆ Cy_SCB_UART_AbortReceive()

void Cy_SCB_UART_AbortReceive ( CySCB_Type base,
cy_stc_scb_uart_context_t context 
)

Abort the current receive operation by clearing the receive status.

  • If the ring buffer is disabled, the receive interrupt sources are disabled.
  • If the ring buffer is enabled, the receive interrupt source is configured to get data from the receive FIFO and put it into the ring buffer.
Parameters
baseThe pointer to the UART SCB instance.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.
Note
  • The RX FIFO and ring buffer are not cleared after abort of receive operation.
  • If after the abort of the receive operation the transmitter continues sending data, it gets into the RX FIFO. To drop this data, the RX FIFO and ring buffer (if enabled) must be cleared when the transmitter stops sending data. Otherwise, received data will be kept and copied to the buffer when Cy_SCB_UART_Receive is called.

◆ Cy_SCB_UART_GetReceiveStatus()

uint32_t Cy_SCB_UART_GetReceiveStatus ( CySCB_Type const *  base,
cy_stc_scb_uart_context_t const *  context 
)

Returns the status of the receive operation.

This status is a bit mask and the value returned may have multiple bits set.

Parameters
baseThe pointer to the UART SCB instance.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.
Returns
UART Receive Statuses.
Note
The status is only cleared by calling Cy_SCB_UART_Receive again.

◆ Cy_SCB_UART_GetNumReceived()

uint32_t Cy_SCB_UART_GetNumReceived ( CySCB_Type const *  base,
cy_stc_scb_uart_context_t const *  context 
)

Returns the number of data elements received since the last call to Cy_SCB_UART_Receive.

Parameters
baseThe pointer to the UART SCB instance.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.
Returns
The number of data elements received.

◆ Cy_SCB_UART_Transmit()

cy_en_scb_uart_status_t Cy_SCB_UART_Transmit ( CySCB_Type base,
void *  buffer,
uint32_t  size,
cy_stc_scb_uart_context_t context 
)

This function starts a UART transmit operation.

It configures the transmit interrupt sources and returns. The Cy_SCB_UART_Interrupt manages the further data transfer.

When the transmit operation is completed (requested number of data elements sent on the bus), the CY_SCB_UART_TRANSMIT_ACTIVE status is cleared and the CY_SCB_UART_TRANSMIT_DONE_EVENT event is generated.

Parameters
baseThe pointer to the UART SCB instance.
bufferPointer to user data to place in transmit buffer. The element size is defined by the data type, which depends on the configured data width.
sizeThe number of data elements to transmit.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.
Returns
cy_en_scb_uart_status_t
Note
  • The buffer must not be modified and must stay allocated until its content is copied into the TX FIFO.
  • This function overrides the TX FIFO interrupt sources and changes the TX FIFO level.

◆ Cy_SCB_UART_AbortTransmit()

void Cy_SCB_UART_AbortTransmit ( CySCB_Type base,
cy_stc_scb_uart_context_t context 
)

Aborts the current transmit operation.

It disables the transmit interrupt sources and clears the transmit FIFO and status.

Parameters
baseThe pointer to the UART SCB instance.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.
Side Effects
The transmit FIFO clear operation also clears the shift register, so that the shifter can be cleared in the middle of a data element transfer, corrupting it. The data element corruption means that all bits that have not been transmitted are transmitted as "ones" on the bus.

◆ Cy_SCB_UART_GetTransmitStatus()

uint32_t Cy_SCB_UART_GetTransmitStatus ( CySCB_Type const *  base,
cy_stc_scb_uart_context_t const *  context 
)

Returns the status of the transmit operation.

This status is a bit mask and the value returned may have multiple bits set.

Parameters
baseThe pointer to the UART SCB instance.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.
Returns
UART Transmit Status.
Note
The status is only cleared by calling Cy_SCB_UART_Transmit or Cy_SCB_UART_AbortTransmit.

◆ Cy_SCB_UART_GetNumLeftToTransmit()

uint32_t Cy_SCB_UART_GetNumLeftToTransmit ( CySCB_Type const *  base,
cy_stc_scb_uart_context_t const *  context 
)

Returns the number of data elements left to transmit since the last call to Cy_SCB_UART_Transmit.

Parameters
baseThe pointer to the UART SCB instance.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure.
Returns
The number of data elements left to transmit.