MTB CAT1 Peripheral driver library

General Description

Functions

cy_en_scb_uart_status_t Cy_SCB_UART_Init (CySCB_Type *base, cy_stc_scb_uart_config_t const *config, cy_stc_scb_uart_context_t *context)
 Initializes the SCB for UART operation. More...
 
void Cy_SCB_UART_DeInit (CySCB_Type *base)
 De-initializes the SCB block. More...
 
__STATIC_INLINE void Cy_SCB_UART_Enable (CySCB_Type *base)
 Enables the SCB block for the UART operation. More...
 
void Cy_SCB_UART_Disable (CySCB_Type *base, cy_stc_scb_uart_context_t *context)
 Disables the SCB block and clears context statuses. More...
 
__STATIC_INLINE void Cy_SCB_UART_EnableCts (CySCB_Type *base)
 Enables the Clear to Send (CTS) input for the UART. More...
 
__STATIC_INLINE void Cy_SCB_UART_DisableCts (CySCB_Type *base)
 Disables the Clear to Send (CTS) input for the UART. More...
 
__STATIC_INLINE void Cy_SCB_UART_SetRtsFifoLevel (CySCB_Type *base, uint32_t level)
 Sets a level for the Ready To Send (RTS) signal activation. More...
 
__STATIC_INLINE uint32_t Cy_SCB_UART_GetRtsFifoLevel (CySCB_Type const *base)
 Returns the level in the RX FIFO for the RTS signal activation. More...
 
__STATIC_INLINE void Cy_SCB_UART_EnableSkipStart (CySCB_Type *base)
 Enables the skip start-bit functionality. More...
 
__STATIC_INLINE void Cy_SCB_UART_DisableSkipStart (CySCB_Type *base)
 Disable the skip start-bit functionality. More...
 
__STATIC_INLINE void Cy_SCB_UART_EnableSingleWireHalfDuplex (CySCB_Type *base)
 Enables Single Wire Half Duplex Communication. More...
 
__STATIC_INLINE void Cy_SCB_UART_DisableSingleWireHalfDuplex (CySCB_Type *base)
 Disables Single Wire Half Duplex Communication. More...
 

Function Documentation

◆ Cy_SCB_UART_Init()

cy_en_scb_uart_status_t Cy_SCB_UART_Init ( CySCB_Type base,
cy_stc_scb_uart_config_t const *  config,
cy_stc_scb_uart_context_t context 
)

Initializes the SCB for UART operation.

Parameters
baseThe pointer to the UART SCB instance.
configThe pointer to configuration structure cy_stc_scb_uart_config_t.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure. If only UART Low-Level API will be used pass NULL as pointer to context.
Returns
cy_en_scb_uart_status_t
Note
Ensure that the SCB block is disabled before calling this function.

◆ Cy_SCB_UART_DeInit()

void Cy_SCB_UART_DeInit ( CySCB_Type base)

De-initializes the SCB block.

Returns the register values to default.

Parameters
baseThe pointer to the UART SCB instance.
Note
Ensure that the SCB block is disabled before calling this function.

◆ Cy_SCB_UART_Enable()

__STATIC_INLINE void Cy_SCB_UART_Enable ( CySCB_Type base)

Enables the SCB block for the UART operation.

Parameters
baseThe pointer to the UART SCB instance.

◆ Cy_SCB_UART_Disable()

void Cy_SCB_UART_Disable ( CySCB_Type base,
cy_stc_scb_uart_context_t context 
)

Disables the SCB block and clears context statuses.

Note that after the block is disabled, the TX and RX FIFOs and hardware statuses are cleared. Also, the hardware stops driving the output and ignores the input. Refer to section Low Power Support for more information about UART pins when SCB disabled.

Parameters
baseThe pointer to the UART SCB instance.
contextThe pointer to the context structure cy_stc_scb_uart_context_t allocated by the user. The structure is used during the UART operation for internal configuration and data retention. The user must not modify anything in this structure. If only UART functions that do not require context will be used to pass NULL as pointer to context.
Note
Calling this function when the UART is busy (transmitter preforms data transfer or receiver is in the middle of data reception) may result transfer corruption because the hardware stops driving the outputs and ignores the inputs. Ensure that the UART is not busy before calling this function.

◆ Cy_SCB_UART_EnableCts()

__STATIC_INLINE void Cy_SCB_UART_EnableCts ( CySCB_Type base)

Enables the Clear to Send (CTS) input for the UART.

The UART will not transmit data while this signal is inactive.

Parameters
baseThe pointer to the UART SCB instance.

◆ Cy_SCB_UART_DisableCts()

__STATIC_INLINE void Cy_SCB_UART_DisableCts ( CySCB_Type base)

Disables the Clear to Send (CTS) input for the UART.

See Cy_SCB_UART_EnableCts for the details.

Parameters
baseThe pointer to the UART SCB instance.

◆ Cy_SCB_UART_SetRtsFifoLevel()

__STATIC_INLINE void Cy_SCB_UART_SetRtsFifoLevel ( CySCB_Type base,
uint32_t  level 
)

Sets a level for the Ready To Send (RTS) signal activation.

When the number of data elements in the receive FIFO is below this level, then the RTS output is active. Otherwise, the RTS signal is inactive. To disable the RTS signal generation, set this level to zero.

Parameters
baseThe pointer to the UART SCB instance.
levelThe level in the RX FIFO for RTS signal activation.

◆ Cy_SCB_UART_GetRtsFifoLevel()

__STATIC_INLINE uint32_t Cy_SCB_UART_GetRtsFifoLevel ( CySCB_Type const *  base)

Returns the level in the RX FIFO for the RTS signal activation.

Parameters
baseThe pointer to the UART SCB instance.
Returns
The level in the RX FIFO for RTS signal activation.

◆ Cy_SCB_UART_EnableSkipStart()

__STATIC_INLINE void Cy_SCB_UART_EnableSkipStart ( CySCB_Type base)

Enables the skip start-bit functionality.

When skip start is enabled the UART hardware does not synchronize to a start bit but synchronizes to the first rising edge. To create a rising edge, the first data bit must be a 1. This feature is useful when the start bit falling edge is used to wake the device through a GPIO interrupt.

Parameters
baseThe pointer to the UART SCB instance.
Note
When skip start-bit feature is enabled, it is applied (UART synchronizes to the first rising edge after start bit) whenever the SCB is enabled. This can cause incorrect UART synchronization and data reception when the first data bit is not a 1. Therefore, disable the skip start-bit when it should not be applied. Note that SCB is disabled before enter Deep Sleep mode or after calling Cy_SCB_UART_Disable.

◆ Cy_SCB_UART_DisableSkipStart()

__STATIC_INLINE void Cy_SCB_UART_DisableSkipStart ( CySCB_Type base)

Disable the skip start-bit functionality.

See Cy_SCB_UART_EnableSkipStart for the details.

Parameters
baseThe pointer to the UART SCB instance.

◆ Cy_SCB_UART_EnableSingleWireHalfDuplex()

__STATIC_INLINE void Cy_SCB_UART_EnableSingleWireHalfDuplex ( CySCB_Type base)

Enables Single Wire Half Duplex Communication.

Note
This is applicable in standard UART submode only.
Parameters
baseThe pointer to the UART SCB instance.
Note
This API is available for PSoC C3 (CAT1B) devices.

◆ Cy_SCB_UART_DisableSingleWireHalfDuplex()

__STATIC_INLINE void Cy_SCB_UART_DisableSingleWireHalfDuplex ( CySCB_Type base)

Disables Single Wire Half Duplex Communication.

Note
This is applicable in standard UART submode only.
Parameters
baseThe pointer to the UART SCB instance.
Note
This API is available for PSoC C3 (CAT1B) devices.