|
| | Pin drive mode |
| | Constants to be used for setting the drive mode of the pin.
|
| |
| | Voltage trip mode |
| | Constants to be used for setting the voltage trip type on the pin.
|
| |
| | Voltage trip automotive compatible mode |
| | Constants to be used for setting the input buffer automotive compatible mode (trip points and hysteresis) for GPIO upper bit.
|
| |
| | Slew Rate Mode |
| | Constants to be used for setting the slew rate of the pin.
|
| |
| | Pin drive strength |
| | Constants to be used for setting the drive strength of the pin.
|
| |
| | Pin drive strength trim |
| | Constants to be used for setting the drive strength trim value of the pin.
|
| |
| | Interrupt trigger type |
| | Constants to be used for setting the interrupt trigger type on the pin.
|
| |
| | SIO output buffer mode |
| | Constants to be used for setting the SIO output buffer mode on the pin.
|
| |
| | SIO input buffer mode |
| | Constants to be used for setting the SIO input buffer mode on the pin.
|
| |
| | SIO input buffer trip-point |
| | Constants to be used for setting the SIO input buffer trip-point of the pin.
|
| |
| | SIO reference voltage for input buffer trip-point |
| | Constants to be used for setting the reference voltage of SIO input buffer trip-point.
|
| |
| | Regulated output voltage level (Voh) and input buffer trip-point of an SIO pair |
| | Constants to be used for setting the Voh and input buffer trip-point of an SIO pair.
|
| |
