AIROC™ BTSDK v4.9 - Documentation | ||||
Macros | |
#define | OPUS_AUTO |
Auto/default setting. | |
#define | OPUS_BITRATE_MAX |
Maximum bitrate. | |
#define | OPUS_APPLICATION_VOIP |
Best for most VoIP/videoconference applications where listening quality and intelligibility matter most. | |
#define | OPUS_APPLICATION_AUDIO |
Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input. | |
#define | OPUS_APPLICATION_RESTRICTED_LOWDELAY |
Only use when lowest-achievable latency is what matters most. More... | |
#define | OPUS_SIGNAL_VOICE 3001 |
Signal being encoded is voice. | |
#define | OPUS_SIGNAL_MUSIC 3002 |
Signal being encoded is music. | |
#define | OPUS_BANDWIDTH_NARROWBAND |
4 kHz bandpass | |
#define | OPUS_BANDWIDTH_MEDIUMBAND |
6 kHz bandpass | |
#define | OPUS_BANDWIDTH_WIDEBAND |
8 kHz bandpass | |
#define | OPUS_BANDWIDTH_SUPERWIDEBAND |
12 kHz bandpass | |
#define | OPUS_BANDWIDTH_FULLBAND |
20 kHz bandpass | |
#define | OPUS_FRAMESIZE_ARG 5000 |
Select frame size from the argument (default) | |
#define | OPUS_FRAMESIZE_2_5_MS 5001 |
Use 2.5 ms frames. | |
#define | OPUS_FRAMESIZE_5_MS 5002 |
Use 5 ms frames. | |
#define | OPUS_FRAMESIZE_10_MS 5003 |
Use 10 ms frames. | |
#define | OPUS_FRAMESIZE_20_MS 5004 |
Use 20 ms frames. | |
#define | OPUS_FRAMESIZE_40_MS 5005 |
Use 40 ms frames. | |
#define | OPUS_FRAMESIZE_60_MS 5006 |
Use 60 ms frames. | |
#define | OPUS_ENCDOER_ST_SIZE_INT32 ((sizeof(OpusEncoder)+3)>>2) |
#define | OPUS_DECDOER_ST_SIZE_INT32 ((sizeof(OpusDecoder)+3)>>2) |
#define | OPUS_ENCDOER_ST_SIZE_BYTE (OPUS_ENCDOER_ST_SIZE_INT32<<2) |
#define | OPUS_DECDOER_ST_SIZE_BYTE (OPUS_DECDOER_ST_SIZE_INT32<<2) |
#define OPUS_APPLICATION_RESTRICTED_LOWDELAY |
Only use when lowest-achievable latency is what matters most.
Voice-optimized modes cannot be used.