This section contains the API's that are common for both target and controller functionality. More...

Functions
uint16_t	wiced_bt_avrc_open (uint8_t p_handle, wiced_bt_avrc_conn_cb_t p_ccb, wiced_bt_device_address_t peer_addr)
	Function wiced_bt_avrc_open. More...

uint16_t	wiced_bt_avrc_close (uint8_t handle)
	Function wiced_bt_avrc_close. More...

uint16_t	wiced_bt_avrc_open_browse (uint8_t handle, uint8_t conn_role)
	Function wiced_bt_avrc_open_browse. More...

uint16_t	wiced_bt_avrc_close_browse (uint8_t handle)
	Function wiced_bt_avrc_close_browse. More...

uint16_t	wiced_bt_avrc_msg_req (uint8_t handle, uint8_t label, uint8_t ctype, BT_HDR *p_pkt)
	Function wiced_bt_avrc_msg_req. More...

uint16_t	wiced_bt_avrc_unit_cmd (uint8_t handle, uint8_t label)
	Function wiced_bt_avrc_unit_cmd. More...

uint16_t	wiced_bt_avrc_sub_cmd (uint8_t handle, uint8_t label, uint8_t page)
	Function wiced_bt_avrc_sub_cmd. More...

uint16_t	wiced_bt_avrc_pass_cmd (uint8_t handle, uint8_t label, wiced_bt_avrc_msg_pass_t *p_msg)
	Function wiced_bt_avrc_pass_cmd. More...

uint16_t	wiced_bt_avrc_pass_rsp (uint8_t handle, uint8_t label, wiced_bt_avrc_msg_pass_t *p_msg)
	Function wiced_bt_avrc_pass_rsp. More...

uint16_t	wiced_bt_avrc_vendor_cmd (uint8_t handle, uint8_t label, wiced_bt_avrc_msg_vendor_t *p_msg)
	Function wiced_bt_avrc_vendor_cmd. More...

uint16_t	wiced_bt_avrc_vendor_rsp (uint8_t handle, uint8_t label, wiced_bt_avrc_msg_vendor_t *p_msg)
	Function wiced_bt_avrc_vendor_rsp. More...

uint8_t	wiced_bt_avrc_set_trace_level (uint8_t new_level)

wiced_bt_avrc_sts_t	wiced_bt_avrc_parse_command (wiced_bt_avrc_msg_t p_msg, wiced_bt_avrc_command_t p_result, uint8_t *p_buf, uint16_t buf_len)
	Function wiced_bt_avrc_parse_command. More...

wiced_bt_avrc_sts_t	wiced_bt_avrc_parse_response (wiced_bt_avrc_msg_t p_msg, wiced_bt_avrc_response_t p_result, uint8_t *p_buf, uint16_t buf_len)
	Function wiced_bt_avrc_parse_response. More...

wiced_bt_avrc_sts_t	wiced_bt_avrc_bld_command (wiced_bt_avrc_command_t p_cmd, BT_HDR *pp_pkt)
	Function wiced_bt_avrc_bld_command. More...

wiced_bt_avrc_sts_t	wiced_bt_avrc_bld_response (uint8_t handle, wiced_bt_avrc_response_t p_rsp, BT_HDR *pp_pkt)
	Function wiced_bt_avrc_bld_response. More...

wiced_bool_t	wiced_bt_avrc_is_valid_avc_type (uint8_t pdu_id, uint8_t ctype)

wiced_bool_t	wiced_bt_avrc_is_valid_player_attr (uint8_t attr)

uint16_t	wiced_bt_avrc_get_ctrl_mtu (void)

uint16_t	wiced_bt_avrc_get_data_mtu (void)

Detailed Description

This section contains the API's that are common for both target and controller functionality.

Function Documentation

wiced_bt_avrc_sts_t wiced_bt_avrc_bld_command	(	wiced_bt_avrc_command_t *	p_cmd,
		BT_HDR **	pp_pkt
	)

Function wiced_bt_avrc_bld_command.

Build AVRCP command

Parameters

[out]	pp_pkt	: Pointer to pointer to the built command
[in]	p_cmd	: Pointer to the structure to build the command from

Returns: Status code (see AVRC status codes) AVRC_STS_NO_ERROR, if the message in p_data is parsed successfully. Otherwise, the error code defined by AVRCP 1.4

wiced_bt_avrc_sts_t wiced_bt_avrc_bld_response	(	uint8_t	handle,
		wiced_bt_avrc_response_t *	p_rsp,
		BT_HDR **	pp_pkt
	)

Function wiced_bt_avrc_bld_response.

Build AVRCP response

Parameters

[out]	pp_pkt	: Pointer to pointer to the built response
[in]	handle	: Connection handle
[in]	p_rsp	: Pointer to the structure to build the response from

Returns: Status code (see AVRC status codes) AVRC_STS_NO_ERROR, if the message in p_data is parsed successfully. Otherwise, the error code defined by AVRCP 1.4

uint16_t wiced_bt_avrc_close ( uint8_t handle )

Function wiced_bt_avrc_close.

Close AVRCP connection

Parameters

[in] handle : Handle of connection to close

Returns: Result code (see AVRC result codes)

uint16_t wiced_bt_avrc_close_browse ( uint8_t handle )

Function wiced_bt_avrc_close_browse.

Close AVRCP browsing connection

Parameters

[in] handle : Connection handle

Returns: Result code (see AVRC result codes)

uint16_t wiced_bt_avrc_msg_req	(	uint8_t	handle,
		uint8_t	label,
		uint8_t	ctype,
		BT_HDR *	p_pkt
	)

Function wiced_bt_avrc_msg_req.

Send an AVRC message

Note: It is expected that p_pkt->offset is at least AVCT_MSG_OFFSET p_pkt->layer_specific is AVCT_DATA_CTRL or AVCT_DATA_BROWSE p_pkt->event is AVRC_OP_VENDOR, AVRC_OP_PASS_THRU or AVRC_OP_BROWSING The above BT_HDR settings are set by the AVRC_Bld* functions.

Parameters

[in]	handle	: Connection handle
[in]	label	: Transaction label
[in]	ctype	: Message type (see AVRC message types)
[in]	p_pkt	: Pointer to the buffer holding the AVRC message

Returns: Result code (see AVRC result codes)

uint16_t wiced_bt_avrc_open	(	uint8_t *	p_handle,
		wiced_bt_avrc_conn_cb_t *	p_ccb,
		wiced_bt_device_address_t	peer_addr
	)

Function wiced_bt_avrc_open.

Open AVRC connection (as intiator or acceptor); register notification callbacks.

The connection role may be AVRC controller or target.

The connection remains available to the application until wiced_bt_avrc_close() is called.

On receiving AVRC_CLOSE_IND_EVT, acceptor connections remain in acceptor mode (no need to re-open the connection)

Parameters

[out]	p_handle	: Connection handle (valid if AVRC_SUCCESS is returned)
[in]	p_ccb	: AVRC connection control block (callbacks and role configuration)
[in]	peer_addr	: Peer device address (if initiator)

Returns: Result code (see AVRC result codes)

uint16_t wiced_bt_avrc_open_browse	(	uint8_t	handle,
		uint8_t	conn_role
	)

Function wiced_bt_avrc_open_browse.

Open AVRCP browsing connection, either as initiator or acceptor.

Parameters

[in]	handle	: Connection handle (obtained from wiced_bt_avrc_open)
[in]	conn_role	: Initiator or acceptor of the connection (see AVRC connection roles)

Returns: Result code (see AVRC result codes)

wiced_bt_avrc_sts_t wiced_bt_avrc_parse_command	(	wiced_bt_avrc_msg_t *	p_msg,
		wiced_bt_avrc_command_t *	p_result,
		uint8_t *	p_buf,
		uint16_t	buf_len
	)

Function wiced_bt_avrc_parse_command.

Parse incoming AVRCP command message.

Parameters

[out]	p_result	: Pointer to the parsed command
[in]	p_msg	: Pointer to the message to parse
[in]	p_buf	: Pointer to the buffer for parsing avrc messages
[in]	buf_len	: Size of the buffer

Returns: Status code (see AVRC status codes) AVRC_STS_NO_ERROR, if the message in p_data is parsed successfully. Otherwise, the error code defined by AVRCP 1.4

wiced_bt_avrc_sts_t wiced_bt_avrc_parse_response	(	wiced_bt_avrc_msg_t *	p_msg,
		wiced_bt_avrc_response_t *	p_result,
		uint8_t *	p_buf,
		uint16_t	buf_len
	)

Function wiced_bt_avrc_parse_response.

Parse incoming AVRCP response message.

Parameters

[out]	p_result	: Pointer to the parsed response
[in]	p_msg	: Pointer to the message to parse
[in]	p_buf	: Pointer to the buffer for parsing avrc messages
[in]	buf_len	: Size of the buffer

Returns: Status code (see AVRC status codes) AVRC_STS_NO_ERROR, if the message in p_data is parsed successfully. Otherwise, the error code defined by AVRCP 1.4

uint16_t wiced_bt_avrc_pass_cmd	(	uint8_t	handle,
		uint8_t	label,
		wiced_bt_avrc_msg_pass_t *	p_msg
	)

Function wiced_bt_avrc_pass_cmd.

Send a PASS THROUGH command to the peer device. This function can only be called for controller role connections. Any response message from the peer is passed back through the wiced_bt_avrc_msg_cback_t callback function.

Parameters

[in]	handle	: Connection handle
[in]	label	: Transaction label
[in]	p_msg	: Pointer to the pass through command

Returns: Result code (see AVRC result codes)

uint16_t wiced_bt_avrc_pass_rsp	(	uint8_t	handle,
		uint8_t	label,
		wiced_bt_avrc_msg_pass_t *	p_msg
	)

Function wiced_bt_avrc_pass_rsp.

Send a PASS THROUGH response to the peer device. This function can only be called for target role connections. This function must be called when a PASS THROUGH command message is received from the peer through the wiced_bt_avrc_msg_cback_t callback function.

Parameters

[in]	handle	: Connection handle
[in]	label	: Transaction label
[in]	p_msg	: Pointer to the pass through response

Returns: Result code (see AVRC result codes)

uint16_t wiced_bt_avrc_sub_cmd	(	uint8_t	handle,
		uint8_t	label,
		uint8_t	page
	)

Function wiced_bt_avrc_sub_cmd.

Send a SUBUNIT INFO command to the peer device. This function can only be called for controller role connections. Any response message from the peer is passed back through the wiced_bt_avrc_msg_cback_t callback function.

Parameters

[in]	handle	: Connection handle
[in]	label	: Transaction label
[in]	page	: Specifies which subunit table is requested. For AVRCP it is typically zero. Value range is 0-7.

Returns: Result code (see AVRC result codes)

uint16_t wiced_bt_avrc_unit_cmd	(	uint8_t	handle,
		uint8_t	label
	)

Function wiced_bt_avrc_unit_cmd.

Send a UNIT INFO command to the peer device. This function can only be called for controller role connections. Any response message from the peer is passed back through the wiced_bt_avrc_msg_cback_t callback function.

Parameters

[in]	handle	: Connection handle
[in]	label	: Transaction label

Returns: Result code (see AVRC result codes)

uint16_t wiced_bt_avrc_vendor_cmd	(	uint8_t	handle,
		uint8_t	label,
		wiced_bt_avrc_msg_vendor_t *	p_msg
	)

Function wiced_bt_avrc_vendor_cmd.

Send a VENDOR DEPENDENT command to the peer device. This function can only be called for controller role connections. Any response message from the peer is passed back through the wiced_bt_avrc_msg_cback_t callback function.

Parameters

[in]	handle	: Connection handle
[in]	label	: Transaction label
[in]	p_msg	: Pointer to the vendor dependent command

Returns: Result code (see AVRC result codes)

uint16_t wiced_bt_avrc_vendor_rsp	(	uint8_t	handle,
		uint8_t	label,
		wiced_bt_avrc_msg_vendor_t *	p_msg
	)

Function wiced_bt_avrc_vendor_rsp.

Send a VENDOR DEPENDENT response to the peer device. This function can only be called for target role connections. This function must be called when a VENDOR DEPENDENT command message is received from the peer through the wiced_bt_avrc_msg_cback_t callback function.

Parameters

[in]	handle	: Connection handle
[in]	label	: Transaction label
[in]	p_msg	: Pointer to the vendor dependent response

Returns: Result code (see AVRC result codes)


			AIROC^™ BTSDK v4.9 - Documentation

Functions

Detailed Description

Function Documentation