whd_oob_config Struct Reference

General Description

Structure for Out-of-band interrupt config parameters which can be set by application during whd power up.

Data Fields
cyhal_gpio_t	host_oob_pin
	Host-side GPIO pin selection.
uint8_t	dev_gpio_sel
	WiFi device-side GPIO pin selection (must be zero)
whd_bool_t	is_falling_edge
	Interrupt trigger (polarity)
uint8_t	intr_priority
	OOB interrupt priority.

---

The documentation for this struct was generated from the following file:

• whd_types.h