Enumerated Types

General Description

Enumerations
enum	cy_en_fll_pll_output_mode_t {   CY_SYSCLK_FLLPLL_OUTPUT_AUTO = 0U,   CY_SYSCLK_FLLPLL_OUTPUT_AUTO1 = 1U,   CY_SYSCLK_FLLPLL_OUTPUT_INPUT = 2U,   CY_SYSCLK_FLLPLL_OUTPUT_OUTPUT = 3U }
	FLL and PLL output mode. More...
enum	cy_en_fll_cco_ranges_t {   CY_SYSCLK_FLL_CCO_RANGE0,   CY_SYSCLK_FLL_CCO_RANGE1,   CY_SYSCLK_FLL_CCO_RANGE2,   CY_SYSCLK_FLL_CCO_RANGE3,   CY_SYSCLK_FLL_CCO_RANGE4 }
	FLL current-controlled oscillator (CCO) frequency ranges. More...

Enumeration Type Documentation

cy_en_fll_pll_output_mode_t

enum cy_en_fll_pll_output_mode_t

FLL and PLL output mode.

See registers CLK_FLL_CONFIG3 and CLK_PLL_CONFIG0, bits BYPASS_SEL.

Enumerator
CY_SYSCLK_FLLPLL_OUTPUT_AUTO	Output FLL/PLL input source when not locked, and FLL/PLL output when locked.
CY_SYSCLK_FLLPLL_OUTPUT_AUTO1	Same as AUTO.
CY_SYSCLK_FLLPLL_OUTPUT_INPUT	Output FLL/PLL input source regardless of lock status.
CY_SYSCLK_FLLPLL_OUTPUT_OUTPUT	Output FLL/PLL output regardless of lock status. This can be dangerous if used to clock clkHf, because FLL/PLL output may be unstable

cy_en_fll_cco_ranges_t

enum cy_en_fll_cco_ranges_t

FLL current-controlled oscillator (CCO) frequency ranges.

See register CLK_FLL_CONFIG4, bits CCO_RANGE.

Enumerator
CY_SYSCLK_FLL_CCO_RANGE0	Target frequency is in range 48 - 64 MHz.
CY_SYSCLK_FLL_CCO_RANGE1	Target frequency is in range 64 - 85 MHz.
CY_SYSCLK_FLL_CCO_RANGE2	Target frequency is in range 85 - 113 MHz.
CY_SYSCLK_FLL_CCO_RANGE3	Target frequency is in range 113 - 150 MHz.
CY_SYSCLK_FLL_CCO_RANGE4	Target frequency is in range 150 - 200 MHz.