Hardware Abstraction Layer (HAL)
Macros
QSPI HAL Results
HAL Drivers » QSPI (Quad Serial Peripheral Interface)HAL General Types/Macros » General Types » | Result Codes

General Description

QSPI specific return codes.

Macros

#define CYHAL_QSPI_RSLT_ERR_BUS_WIDTH   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 0))
 Bus width Error. More...
 
#define CYHAL_QSPI_RSLT_ERR_PIN   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 1))
 Pin related Error. More...
 
#define CYHAL_QSPI_RSLT_ERR_DATA_SEL   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 2))
 Data select Error. More...
 
#define CYHAL_QSPI_RSLT_ERR_INSTANCE   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 3))
 QSPI instance related error. More...
 
#define CYHAL_QSPI_RSLT_ERR_FREQUENCY   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 4))
 Clock frequency error. More...
 
#define CYHAL_QSPI_RSLT_ERR_TIMEOUT   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 5))
 Waiting for certain event error. More...
 
#define CYHAL_QSPI_RSLT_ERR_CANNOT_CONFIG_SSEL   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 6))
 Cannot configure SSEL signal.
 
#define CYHAL_QSPI_RSLT_ERR_CANNOT_SWITCH_SSEL   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 7))
 Cannot switch to specified SSEL signal.
 

Macro Definition Documentation

◆ CYHAL_QSPI_RSLT_ERR_BUS_WIDTH

#define CYHAL_QSPI_RSLT_ERR_BUS_WIDTH   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 0))

Bus width Error.

◆ CYHAL_QSPI_RSLT_ERR_PIN

#define CYHAL_QSPI_RSLT_ERR_PIN   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 1))

Pin related Error.

◆ CYHAL_QSPI_RSLT_ERR_DATA_SEL

#define CYHAL_QSPI_RSLT_ERR_DATA_SEL   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 2))

Data select Error.

◆ CYHAL_QSPI_RSLT_ERR_INSTANCE

#define CYHAL_QSPI_RSLT_ERR_INSTANCE   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 3))

QSPI instance related error.

◆ CYHAL_QSPI_RSLT_ERR_FREQUENCY

#define CYHAL_QSPI_RSLT_ERR_FREQUENCY   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 4))

Clock frequency error.

◆ CYHAL_QSPI_RSLT_ERR_TIMEOUT

#define CYHAL_QSPI_RSLT_ERR_TIMEOUT   (CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_QSPI, 5))

Waiting for certain event error.