OTA Bootloader Support Macros

General Description

Macros used to define the OTA Bootloader Support behavior.

Macros
#define	CY_RSLT_SERIAL_FLASH_ERR_UNSUPPORTED   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 1))
	The function or operation is not supported on the target or the memory.
#define	CY_RSLT_SERIAL_FLASH_ERR_NOT_INITED   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 2))
	The Serial Flash not initialized.
#define	CY_RSLT_SERIAL_FLASH_ERR_BAD_PARAM   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 3))
	Parameters passed to a function are invalid.
#define	CY_RSLT_SERIAL_FLASH_ERR_READ_BUSY   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 4))
	A previously initiated read operation is not yet complete.
#define	CY_RSLT_SERIAL_FLASH_ERR_DMA   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 5))
	A DMA error occurred during read transfer.
#define	CY_RSLT_SERIAL_FLASH_ERR_QSPI_BUSY   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 6))
	Read abort failed. More...
#define	CY_RSLT_SERIAL_FLASH_ERR_UNSUPPORTED   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 1))
	The function or operation is not supported on the target or the memory.
#define	CY_RSLT_SERIAL_FLASH_ERR_NOT_INITED   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 2))
	The Serial Flash not initialized.
#define	CY_RSLT_SERIAL_FLASH_ERR_BAD_PARAM   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 3))
	Parameters passed to a function are invalid.
#define	CY_RSLT_SERIAL_FLASH_ERR_READ_BUSY   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 4))
	A previously initiated read operation is not yet complete.
#define	CY_RSLT_SERIAL_FLASH_ERR_DMA   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 5))
	A DMA error occurred during read transfer.
#define	CY_RSLT_SERIAL_FLASH_ERR_QSPI_BUSY   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 6))
	Read abort failed. More...

Macro Definition Documentation

#define CY_RSLT_SERIAL_FLASH_ERR_QSPI_BUSY   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 6))

Read abort failed.

QSPI block is busy.

#define CY_RSLT_SERIAL_FLASH_ERR_QSPI_BUSY   (cy_rslt_t)(CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_BOARD_LIB_SERIAL_FLASH, 6))

Read abort failed.

QSPI block is busy.