Enumerated Types

General Description

Enumerations
enum	cy_en_scb_uart_status_t {   CY_SCB_UART_SUCCESS = 0U,   CY_SCB_UART_BAD_PARAM = (CY_SCB_ID | CY_PDL_STATUS_ERROR | CY_SCB_UART_ID | 1U),   CY_SCB_UART_RECEIVE_BUSY = (CY_SCB_ID | CY_PDL_STATUS_ERROR | CY_SCB_UART_ID | 2U),   CY_SCB_UART_TRANSMIT_BUSY = (CY_SCB_ID | CY_PDL_STATUS_ERROR | CY_SCB_UART_ID | 3U) }
	UART status codes. More...
enum	cy_en_scb_uart_mode_t {   CY_SCB_UART_STANDARD = 0U,   CY_SCB_UART_SMARTCARD = 1U,   CY_SCB_UART_IRDA = 2U }
	UART Mode. More...
enum	cy_en_scb_uart_stop_bits_t {   CY_SCB_UART_STOP_BITS_1 = 2U,   CY_SCB_UART_STOP_BITS_1_5 = 3U,   CY_SCB_UART_STOP_BITS_2 = 4U,   CY_SCB_UART_STOP_BITS_2_5 = 5U,   CY_SCB_UART_STOP_BITS_3 = 6U,   CY_SCB_UART_STOP_BITS_3_5 = 7U,   CY_SCB_UART_STOP_BITS_4 = 8U }
	UART Stop Bits. More...
enum	cy_en_scb_uart_parity_t {   CY_SCB_UART_PARITY_NONE = 0U,   CY_SCB_UART_PARITY_EVEN = 2U,   CY_SCB_UART_PARITY_ODD = 3U }
	UART Parity. More...
enum	cy_en_scb_uart_polarity_t {   CY_SCB_UART_ACTIVE_LOW = 0U,   CY_SCB_UART_ACTIVE_HIGH = 1U }
	UART Polarity. More...

Enumeration Type Documentation

enum cy_en_scb_uart_status_t

UART status codes.

Enumerator
CY_SCB_UART_SUCCESS	Operation completed successfully.
CY_SCB_UART_BAD_PARAM	One or more of input parameters are invalid.
CY_SCB_UART_RECEIVE_BUSY	The UART is busy processing a receive operation.
CY_SCB_UART_TRANSMIT_BUSY	The UART is busy processing a transmit operation.

enum cy_en_scb_uart_mode_t

UART Mode.

Enumerator
CY_SCB_UART_STANDARD	Configures the SCB for Standard UART operation.
CY_SCB_UART_SMARTCARD	Configures the SCB for SmartCard operation.
CY_SCB_UART_IRDA	Configures the SCB for IrDA operation.

enum cy_en_scb_uart_stop_bits_t

UART Stop Bits.

Enumerator
CY_SCB_UART_STOP_BITS_1	UART looks for 1 Stop Bit.
CY_SCB_UART_STOP_BITS_1_5	UART looks for 1.5 Stop Bits.
CY_SCB_UART_STOP_BITS_2	UART looks for 2 Stop Bits.
CY_SCB_UART_STOP_BITS_2_5	UART looks for 2.5 Stop Bits.
CY_SCB_UART_STOP_BITS_3	UART looks for 3 Stop Bits.
CY_SCB_UART_STOP_BITS_3_5	UART looks for 3.5 Stop Bits.
CY_SCB_UART_STOP_BITS_4	UART looks for 4 Stop Bits.

enum cy_en_scb_uart_parity_t

UART Parity.

Enumerator
CY_SCB_UART_PARITY_NONE	UART has no parity check.
CY_SCB_UART_PARITY_EVEN	UART has even parity check.
CY_SCB_UART_PARITY_ODD	UART has odd parity check.

enum cy_en_scb_uart_polarity_t

UART Polarity.

Enumerator
CY_SCB_UART_ACTIVE_LOW	Signal is active low.
CY_SCB_UART_ACTIVE_HIGH	Signal is active high.