MTB CAT1 Peripheral driver library

General Description

This section contains interrupt bit masks to be used with:

Macros

#define CY_CANFD_RX_FIFO_0_WATERMARK_REACHED   (CANFD_CH_M_TTCAN_IR_RF0W_Msk)
 Rx FIFO 0 Watermark Reached.
 
#define CY_CANFD_RX_FIFO_0_FULL   (CANFD_CH_M_TTCAN_IR_RF0F_Msk)
 Rx FIFO 0 Full.
 
#define CY_CANFD_RX_FIFO_0_MSG_LOST   (CANFD_CH_M_TTCAN_IR_RF0L__Msk)
 Rx FIFO 0 Message Lost.
 
#define CY_CANFD_RX_FIFO_1_WATERMARK_REACHED   (CANFD_CH_M_TTCAN_IR_RF1W_Msk)
 Rx FIFO 1 Watermark Reached.
 
#define CY_CANFD_RX_FIFO_1_FULL   (CANFD_CH_M_TTCAN_IR_RF1F_Msk)
 Rx FIFO 1 Full.
 
#define CY_CANFD_RX_FIFO_1_MSG_LOST   (CANFD_CH_M_TTCAN_IR_RF1L__Msk)
 Rx FIFO 1 Message Lost.
 
#define CY_CANFD_TX_FIFO_1_WATERMARK_REACHED   (CANFD_CH_M_TTCAN_IR_TEFW_Msk)
 Tx Event FIFO Watermark Reached.
 
#define CY_CANFD_TX_FIFO_1_FULL   (CANFD_CH_M_TTCAN_IR_TEFF_Msk)
 Tx Event FIFO Full.
 
#define CY_CANFD_TX_FIFO_1_MSG_LOST   (CANFD_CH_M_TTCAN_IR_TEFL__Msk)
 Tx Event FIFO Element Lost.
 
#define CY_CANFD_TIMESTAMP_WRAPAROUND   (CANFD_CH_M_TTCAN_IR_TSW_Msk)
 Timestamp Wraparound.
 
#define CY_CANFD_MRAM_ACCESS_FAILURE   (CANFD_CH_M_TTCAN_IR_MRAF_Msk)
 Message RAM Access Failure.
 
#define CY_CANFD_TIMEOUT_OCCURRED   (CANFD_CH_M_TTCAN_IR_TOO_Msk)
 Timeout Occurred.
 
#define CY_CANFD_BIT_ERROR_CORRECTED   (CANFD_CH_M_TTCAN_IR_BEC_Msk)
 Bit Error Corrected.
 
#define CY_CANFD_BIT_ERROR_UNCORRECTED   (CANFD_CH_M_TTCAN_IR_BEU_Msk)
 Bit Error Uncorrected.
 
#define CY_CANFD_ERROR_LOG_OVERFLOW   (CANFD_CH_M_TTCAN_IR_ELO_Msk)
 Error Logging Overflow.
 
#define CY_CANFD_ERROR_PASSIVE   (CANFD_CH_M_TTCAN_IR_EP__Msk)
 Error Passive.
 
#define CY_CANFD_WARNING_STATUS   (CANFD_CH_M_TTCAN_IR_EW__Msk)
 Warning Status.
 
#define CY_CANFD_BUS_OFF_STATUS   (CANFD_CH_M_TTCAN_IR_BO__Msk)
 Bus_Off Status.
 
#define CY_CANFD_WATCHDOG_INTERRUPT   (CANFD_CH_M_TTCAN_IR_WDI_Msk)
 Watchdog Interrupt.
 
#define CY_CANFD_PROTOCOL_ERROR_ARB_PHASE   (CANFD_CH_M_TTCAN_IR_PEA_Msk)
 Protocol Error in Arbitration Phase.
 
#define CY_CANFD_PROTOCOL_ERROR_DATA_PHASE   (CANFD_CH_M_TTCAN_IR_PED_Msk)
 Protocol Error in Data Phase.
 
#define CY_CANFD_ACCESS_RESERVED_ADDR   (CANFD_CH_M_TTCAN_IR_ARA_Msk)
 Access to Reserved Address.