SDHC specific return codes.
|
|
#define | MTB_HAL_SDHC_RSLT_ERR_UNSUPPORTED (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, MTB_HAL_RSLT_MODULE_SDHC, 0)) |
| | Requested feature is not supported on this hardware.
|
| |
|
#define | MTB_HAL_SDHC_RSLT_ERR_ERASE_CMPLT_TIMEOUT (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, MTB_HAL_RSLT_MODULE_SDHC, 1)) |
| | Timeout during waiting for erase complete.
|
| |
|
#define | MTB_HAL_SDHC_RSLT_ERR_BLOCK_COUNT_GET_FAILURE (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, MTB_HAL_RSLT_MODULE_SDHC, 2)) |
| | Block count cannot be retrieved.
|
| |
|
#define | MTB_HAL_SDHC_RSLT_ERR_SET_FREQ (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, MTB_HAL_RSLT_MODULE_SDHC, 3)) |
| | Cannot set desired SD bus frequency.
|
| |
|
#define | MTB_HAL_SDHC_RSLT_ERR_WRONG_PARAM (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, MTB_HAL_RSLT_MODULE_SDHC, 4)) |
| | Incorrect function parameter.
|
| |
|
#define | MTB_HAL_SDHC_RSLT_ERR_IO_VOLT_SWITCH_SEQ (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, MTB_HAL_RSLT_MODULE_SDHC, 5)) |
| | Error occured during I/O voltage switch sequence.
|
| |
|
#define | MTB_HAL_SDHC_RSLT_ERR_TOUT_CFG (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, MTB_HAL_RSLT_MODULE_SDHC, 6)) |
| | Cannot configure data timeout.
|
| |
|
#define | MTB_HAL_SDHC_RSLT_ERR_CLOCK (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, MTB_HAL_RSLT_MODULE_SDHC, 7)) |
| | Cannot make changes in user provided clock configuration or provided clock is incorrect.
|
| |
