SPP library of the AIROC BTSDK provide a simple method for an application to integrate SPP functionality.
More...
SPP library of the AIROC BTSDK provide a simple method for an application to integrate SPP functionality.
Application just needs to call API to connect/disconnect and send data. Library in turn indicates status of the connection and passes to the application received data.
| typedef void(* wiced_bt_spp_connection_down_callback_t)(uint16_t handle) |
Connection Down callback indicates that an active session has been terminated.
- Parameters
-
| [in] | handle | : Handle that identifies the external accessory session |
- Returns
- none
| typedef void(* wiced_bt_spp_connection_failed_callback_t)(void) |
Connection failed callback indicates to the application that the library failed to establish RFCOMM connection with the peer device after connection was requested by the wiced_bt_spp_connect call.
- Returns
- none
| typedef void(* wiced_bt_spp_connection_up_callback_t)(uint16_t handle, uint8_t *bd_addr) |
The application must implement connection up callback to be called by the library.
The callback indicates to the application that SPP over RFCOMM session with a specified device has been successfully established. This can be a result of the wiced_bt_spp_connect requested by the application, or due to a peer device establishing connection from its side.
- Parameters
-
| [in] | handle | : Handle that identifies newly established session. |
| [in] | bd_addr | : Bluetooth Device address of the connected device. |
- Returns
- none
Rx Data callback passed to the application data received over the SPP session.
- Parameters
-
| [in] | handle | : Handle that identifies the external accessory session |
| [in] | p_data | : Pointer to buffer with data. |
| [in] | data_len | : Length of the data |
- Returns
- none
| typedef void(* wiced_bt_spp_service_not_found_callback_t)(void) |
Service not found callback indicates wiced_bt_spp_connect call requested to establish connection to a device which is currently not present, or which is not running SPP service.
- Returns
- none
| wiced_bool_t wiced_bt_spp_can_send_more_data |
( |
uint16_t |
handle | ) |
|
Function wiced_bt_spp_can_send_more_data.
- Parameters
-
| [in] | handle | : The handle returned by the application in the wiced_bt_spp_connection_up_callback. Returns TRUE if library can queue forward data, or FALSE if forward data queue is full. |
Function wiced_bt_spp_connect.
Establish External Accessory connection to an iOS device. Library will perform Service Discovery. If SPP service is running on the specified device RFCOMM connection is established. When session is established, library executes spp_connection_up_callback.
- Parameters
-
| [in] | bd_addr | : Bluetooth Device address to connect to. |
- Returns
- wiced_result_t : Result of operation
Function wiced_bt_spp_disconnect.
Disconnect External Accessory Session with the iOS device. Bluetooth connection is brought down as well.
- Parameters
-
| [in] | handle | : The handle returned by the application in the wiced_bt_spp_connection_up_callback. |
- Returns
- wiced_result_t : Result of operation
| uint8_t wiced_bt_spp_get_connection_state |
( |
BD_ADDR |
bd_addr | ) |
|
SPP application may use this function to get the connection state when rfcomm connection made.
- Returns
- connection state
| uint8_t wiced_bt_spp_port_purge |
( |
uint16_t |
handle, |
|
|
uint8_t |
purge_flags |
|
) |
| |
SPP application may use this function to discard all the data from the output or input queues of the specified connection.
- Parameters
-
| [in] | handle | : Connection handle indicated in the connection up callback |
| [in] | purge_flags | - specify the action to take with PORT_PURGE_TXCLEAR and/or PORT_PURGE_RXCLEAR. |
- Returns
- rfcomm port return code
| uint16_t wiced_bt_spp_rfcomm_get_peer_mtu |
( |
uint16_t |
handle | ) |
|
SPP application may use this function to read the peer_mtu size when rfcomm connection made.
- Returns
- rfcomm port peer mtu size
| void wiced_bt_spp_rx_flow_enable |
( |
uint16_t |
handle, |
|
|
wiced_bool_t |
enable |
|
) |
| |
SPP application may use this call to disable or reenable the RX data flow.
- Parameters
-
| [in] | handle | : Connection handle indicated in the connection up callback |
| [in] | enable | : If true, data flow is enabled |
- Returns
- none
| wiced_bool_t wiced_bt_spp_send_session_data |
( |
uint16_t |
handle, |
|
|
uint8_t * |
p_data, |
|
|
uint32_t |
len |
|
) |
| |
Send data over the established External Accessory connection.
The session must be SPP_EA_SESSION_ID. The first 2 octets of the p_data must be the handle passed to the application in the wiced_bt_spp_connection_up_callback in the big endian format.
- Parameters
-
| [in] | handle | : Connection handle indicated in the connection up callback |
| [in] | p_data | : Pointer to buffer with data to send. |
| [in] | len | : Length of the data + handle |
- Returns
- WICED_TRUE: if data is scheduled for transmission, otherwise WICED_FALSE
Function wiced_bt_spp_startup.
Initialize SPP library and starts the RFCOMM service.
- Parameters
-
| [in] | p_reg | : Registration control block that includes RFCOMM SCN and callbacks |
- Returns
- wiced_result_t : Result of operation
