Header Operations

OBEX Header Operations. More...

Functions
uint8_t *	wiced_bt_obex_header_init (wiced_bt_obex_handle_t handle, uint16_t pkt_size)
	Function wiced_bt_obex_header_init. More...
wiced_bt_obex_status_t	wiced_bt_obex_add_header (uint8_t *p_pkt, wiced_bt_obex_header_identifier_t id, uint8_t *p_data, uint16_t len)
	Function wiced_bt_obex_add_header. More...
wiced_bt_obex_status_t	wiced_bt_obex_add_header_utf8 (uint8_t *p_pkt, wiced_bt_obex_header_identifier_t id, uint8_t *p_str)
	Function wiced_bt_obex_add_header_utf8. More...
wiced_bt_obex_status_t	wiced_bt_obex_add_triplet_header (uint8_t *p_pkt, wiced_bt_obex_header_identifier_t id, wiced_bt_obex_triplet_t *p_triplet, uint8_t num)
	Function wiced_bt_obex_add_triplet_header. More...
uint8_t *	wiced_bt_obex_add_byte_sequence_start (uint8_t *p_pkt, uint16_t *p_len)
	Function wiced_bt_obex_add_byte_sequence_start. More...
wiced_bt_obex_status_t	wiced_bt_obex_add_byte_sequence_end (uint8_t *p_pkt, wiced_bt_obex_header_identifier_t id, uint16_t len)
	Function wiced_bt_obex_add_byte_sequence_end. More...
wiced_bt_obex_status_t	wiced_bt_obex_read_header (uint8_t *p_pkt, wiced_bt_obex_header_identifier_t id, uint8_t *p_data, uint16_t *p_len)
	Function wiced_bt_obex_read_header. More...
wiced_bt_obex_status_t	wiced_bt_obex_read_header_utf8 (uint8_t *p_pkt, wiced_bt_obex_header_identifier_t id, uint8_t *p_data, uint16_t max_len)
	Function wiced_bt_obex_read_header_utf8. More...
wiced_bt_obex_status_t	wiced_bt_obex_find_byte_sequence_header (uint8_t *p_pkt, wiced_bt_obex_header_identifier_t id, uint8_t **p_data, uint16_t *p_len)
	Function wiced_bt_obex_find_byte_sequence_header. More...
uint8_t	wiced_bt_obex_find_body_header (uint8_t *p_pkt, uint8_t **p_body, uint16_t *p_len, wiced_bool_t *p_end)
	Function wiced_bt_obex_find_body_header. More...

Variables
uint16_t	event
uint16_t	len
uint16_t	offset
uint16_t	space_left
wiced_bt_obex_setpath_flag_t	sp_flags
wiced_bool_t	final
wiced_bt_obex_action_t	action
uint8_t	ssn
wiced_bool_t	final
wiced_bt_obex_put_type_t	type
uint8_t	ssn
wiced_bool_t	final
uint8_t	ssn
wiced_bt_device_address_t	peer_addr
uint16_t	mtu
wiced_bt_obex_handle_t	handle
wiced_bool_t	no_rsp
uint8_t	ssn
wiced_bt_obex_sess_opcode_t	sess_op
wiced_bt_obex_sess_state_t	sess_st
wiced_bt_device_address_t	peer_addr
uint8_t *	p_sess_info
uint32_t	timeout
uint32_t	obj_offset
uint8_t	nssn
uint8_t	ssn
wiced_bt_obex_action_t	action
uint8_t	ssn
wiced_bt_obex_setpath_flag_t	flag
uint8_t	ssn
wiced_bt_obex_conn_evt_t	conn
wiced_bt_obex_sess_evt_t	sess
wiced_bt_obex_put_evt_t	put
wiced_bt_obex_setpath_evt_t	sp
wiced_bt_obex_action_evt_t	action
wiced_bt_obex_get_evt_t	get
uint16_t	len
uint8_t	target [OBEX_MAX_TARGET_LEN]
wiced_bt_obex_target_t *	p_target
wiced_bt_obex_server_cback_t *	p_cback
uint16_t	transport_rx_mtu
uint16_t	obex_rx_mtu
uint8_t	scn
wiced_bool_t	authenticate
uint8_t	auth_option
uint8_t	realm_charset
uint8_t *	p_realm
uint8_t	realm_len
uint8_t	max_sessions
wiced_bool_t	get_nonf
uint16_t	psm
uint32_t	nonce
wiced_bool_t	srm
uint8_t	max_suspend
uint8_t	tag
uint8_t	len
uint8_t *	p_array

Detailed Description

OBEX Header Operations.

Header Operation API Functions sub module for OBEX.

Function Documentation

wiced_bt_obex_status_t wiced_bt_obex_add_byte_sequence_end	(	uint8_t *	p_pkt,
		wiced_bt_obex_header_identifier_t	id,
		uint16_t	len
	)

Function wiced_bt_obex_add_byte_sequence_end.

This function is called to finish adding byte sequence header by adding header identifier and length. It is assumed that the actual value of the byte sequence has been copied into the OBEX packet.

Parameters

[in]	p_pkt	: OBEX packet
[in]	id	: OBEX header identifier
[in]	len	: Length of data

Returns

wiced_bt_obex_status_t

uint8_t* wiced_bt_obex_add_byte_sequence_start	(	uint8_t *	p_pkt,
		uint16_t *	p_len
	)

Function wiced_bt_obex_add_byte_sequence_start.

This is an alternative way to add a byte sequence header. Call this function to get the starting point of the byte sequence header buffer, fill in byte sequence data, then call wiced_bt_obex_add_byte_sequence_end to finish.

Parameters

[in]	p_pkt	: OBEX packet
[out]	p_len	: Pointer to return available buffer length

Returns

Starting point to the OBEX packet byte sequence header buffer

wiced_bt_obex_status_t wiced_bt_obex_add_header	(	uint8_t *	p_pkt,
		wiced_bt_obex_header_identifier_t	id,
		uint8_t *	p_data,
		uint16_t	len
	)

Function wiced_bt_obex_add_header.

This function adds a header to the OBEX packet.

For Unicode text header, parameter p_data should point to an Ascii string and len should contain the string length. This function will convert the input to Unicode string. If the input string is UTF-8, call wiced_bt_obex_add_header_utf8 instead. For byte sequence header, parameter p_data should point to the byte sequence and len should contain the byte sequence length. For 1 byte header, parameter p_data should point to a byte and len should equal to 1. For 4 byte header, parameter p_data should point to a uint32_t and len should equal to 4.

Parameters

[in]	p_pkt	: OBEX packet
[in]	id	: OBEX header identifier
[in]	p_data	: Pointer to data
[in]	len	: Data length

Returns

wiced_bt_obex_status_t

wiced_bt_obex_status_t wiced_bt_obex_add_header_utf8	(	uint8_t *	p_pkt,
		wiced_bt_obex_header_identifier_t	id,
		uint8_t *	p_str
	)

Function wiced_bt_obex_add_header_utf8.

This function adds a Unicode string header with UTF-8 string as input

Parameters

[in]	p_pkt	: OBEX packet
[in]	id	: OBEX header identifier
[in]	p_str	: Pointer to UTF-8 string

Returns

wiced_bt_obex_status_t

wiced_bt_obex_status_t wiced_bt_obex_add_triplet_header	(	uint8_t *	p_pkt,
		wiced_bt_obex_header_identifier_t	id,
		wiced_bt_obex_triplet_t *	p_triplet,
		uint8_t	num
	)

Function wiced_bt_obex_add_triplet_header.

This function adds a header with data in triplet format

Parameters

[in]	p_pkt	: OBEX packet
[in]	id	: OBEX header identifier
[in]	p_triplet	: Pointer to triplets
[in]	num	: Number of triplets

Returns

wiced_bt_obex_status_t

uint8_t wiced_bt_obex_find_body_header	(	uint8_t *	p_pkt,
		uint8_t **	p_body,
		uint16_t *	p_len,
		wiced_bool_t *	p_end
	)

Function wiced_bt_obex_find_body_header.

This function finds OBEX_HI_BODY and OBEX_HI_BODY_END headers in an OBEX packet

Parameters

[in]	p_pkt	: OBEX packet
[out]	p_body	: A pointer to return body header pointer
[out]	p_len	: Return body header length
[out]	p_end	: WICED_TRUE : found a OBEX_HI_BODY_END header : WICED_FALSE : found a OBEX_HI_BODY header or no body header was found

Returns

0 : No body header was found 1 : Found a OBEX_HI_BODY or OBEX_HI_BODY_END header 2 : Found both OBEX_HI_BODY and OBEX_HI_BODY_END headers

wiced_bt_obex_status_t wiced_bt_obex_find_byte_sequence_header	(	uint8_t *	p_pkt,
		wiced_bt_obex_header_identifier_t	id,
		uint8_t **	p_data,
		uint16_t *	p_len
	)

Function wiced_bt_obex_find_byte_sequence_header.

This function finds a specific byte sequence header, return its data pointer and length

Parameters

[in]	p_pkt	: OBEX packet
[in]	id	: OBEX header identifier
[out]	p_data	: A pointer to return header data pointer
[out]	p_len	: Return header length

Returns

wiced_bt_obex_status_t

uint8_t* wiced_bt_obex_header_init	(	wiced_bt_obex_handle_t	handle,
		uint16_t	pkt_size
	)

Function wiced_bt_obex_header_init.

This function is called to initialize an OBEX packet. This function takes a GKI buffer and sets the offset in tOBEX_BUFFER as OBEX_HDR_OFFSET, the len as 0. The space_left is set to the length still available. This function compares the given (pkt_size - sizeof(uint8_t)) with the peer MTU to get the lesser of the two and set the space_left to (lesser_size - OBEX_HDR_OFFSET). If composing a header for the CONNECT request (there is no client handle yet), use OBEX_HANDLE_NULL as the handle.

Parameters

[in]	handle	: OBEX handle
[in]	pkt_size	: Required packet size

Returns

A pointer to allocated packet

wiced_bt_obex_status_t wiced_bt_obex_read_header	(	uint8_t *	p_pkt,
		wiced_bt_obex_header_identifier_t	id,
		uint8_t *	p_data,
		uint16_t *	p_len
	)

Function wiced_bt_obex_read_header.

This function reads a header from the OBEX packet.

For Unicode text header, this function will convert Unicode to Ascii string. To convert Unicode to UTF-8 string, call wiced_bt_obex_read_header_utf8 instead. For byte sequence header, it reads byte sequence to buffer pointed to by parameter p_data. To avoid the data copying, call wiced_bt_obex_find_byte_sequence_header instead. For 1 byte and 4 byte header, it reads data to buffer pointed to by p_data.

Parameters

[in]	p_pkt	: OBEX packet
[in]	id	: OBEX header identifier
[out]	p_data	: Pointer to buffer that receives data
	in/out]	p_len : Input: output buffer size, Output: read data length

Returns

wiced_bt_obex_status_t

wiced_bt_obex_status_t wiced_bt_obex_read_header_utf8	(	uint8_t *	p_pkt,
		wiced_bt_obex_header_identifier_t	id,
		uint8_t *	p_data,
		uint16_t	max_len
	)

Function wiced_bt_obex_read_header_utf8.

This function reads a Unicode string header with UTF-8 string as output

Parameters

[in]	p_pkt	: OBEX packet
[in]	id	: OBEX header identifier
[out]	p_data	: Pointer to buffer that receives UTF-8 string
[in]	max_len	: Max output size

Returns

wiced_bt_obex_status_t