This section describes API and Data structures required to initialize and configure the BT-Stack. More...

Data Structures
struct	wiced_bt_cfg_ble_scan_settings_t
	LE Scan settings. More...

struct	wiced_bt_cfg_ble_advert_settings_t
	Advertising settings. More...

struct	wiced_bt_cfg_gatt_t
	GATT settings. More...

struct	wiced_bt_cfg_avdt_t
	Audio/Video Distribution configuration. More...

struct	wiced_bt_cfg_avrc_t
	Audio/Video Remote Control configuration. More...

struct	wiced_bt_cfg_rfcomm_t
	RFCOMM configuration. More...

struct	wiced_bt_cfg_isoc_t
	Isochronous Connection configuration settings. More...

struct	wiced_bt_cfg_br_t
	BR/EDR configuration settings. More...

struct	wiced_bt_cfg_ble_t
	LE configuration settings. More...

struct	wiced_bt_cfg_l2cap_application_t
	Settings for application managed L2CAP protocols (optional) More...

struct	wiced_bt_cfg_settings_t_
	Bluetooth stack configuration. More...

Typedefs
typedef uint8_t	wiced_bt_ble_scan_mode_t
	scan mode (see wiced_bt_ble_scan_mode_e)

typedef uint8_t	wiced_bt_sec_level_t
	Required security level.

typedef uint8_t	wiced_bt_ble_advert_chnl_map_t
	LE advertisement channel map (see wiced_bt_ble_advert_chnl_map_e)

typedef uint16_t	wiced_bt_gatt_appearance_t
	GATT appearance (see gatt_appearance_e in gattdefs.h)

typedef struct wiced_bt_cfg_settings_t_	wiced_bt_cfg_settings_t
	Bluetooth stack configuration.

Enumerations
enum	wiced_bt_ble_scan_mode_e { BTM_BLE_SCAN_MODE_PASSIVE = 0, BTM_BLE_SCAN_MODE_ACTIVE = 1, BTM_BLE_SCAN_MODE_NONE = 0xff }
	Scan modes. More...

enum	wiced_bt_sec_level_e { BTM_SEC_BEST_EFFORT = 1, BTM_SEC_SC_REQUIRED = 2, BTM_SEC_AUTH_REQUIRED = 4, BTM_SEC_SC_AUTH_REQUIRED = (BTM_SEC_SC_REQUIRED \| 4) }
	Security Service Levels (bit fields) More...

enum	wiced_bt_ble_advert_chnl_map_e { BTM_BLE_ADVERT_CHNL_37 = (0x01 << 0), BTM_BLE_ADVERT_CHNL_38 = (0x01 << 1), BTM_BLE_ADVERT_CHNL_39 = (0x01 << 2) }
	advertising channel map More...

Functions
int32_t	wiced_bt_stack_get_dynamic_memory_size_for_config (const wiced_bt_cfg_settings_t *p_bt_cfg_settings)
	Returns the expected dynamic memory size required for the stack based on the p_bt_cfg_settings. More...

Bluetooth Configuration Default Values
Bluetooth Configuration Default Values Note These are typical values for config parameters used for some common LE, BR/EDR use cases.
#define	WICED_BT_CFG_DEFAULT_INQUIRY_SCAN_INTERVAL 0x0800
	Inquiry scan interval (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_INQUIRY_SCAN_WINDOW 0x0012
	Inquiry scan window (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_PAGE_SCAN_INTERVAL 0x0800
	Page scan interval (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_PAGE_SCAN_WINDOW 0x0012
	Page scan window (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_HIGH_DUTY_SCAN_INTERVAL 96
	High duty scan interval (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_HIGH_DUTY_SCAN_WINDOW 48
	High duty scan window (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_LOW_DUTY_SCAN_INTERVAL 2048
	Low duty scan interval (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_LOW_DUTY_SCAN_WINDOW 18
	Low duty scan window (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_HIGH_DUTY_CONN_SCAN_INTERVAL 96
	High duty cycle connection scan interval (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_HIGH_DUTY_CONN_SCAN_WINDOW 48
	High duty cycle connection scan window (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_LOW_DUTY_CONN_SCAN_INTERVAL 2048
	Low duty cycle connection scan interval (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_LOW_DUTY_CONN_SCAN_WINDOW 18
	Low duty cycle connection scan window (in slots (1 slot = 0.625 ms))

#define	WICED_BT_CFG_DEFAULT_CONN_MIN_INTERVAL 80
	Minimum connection event interval ( in 1.25 msec)

#define	WICED_BT_CFG_DEFAULT_CONN_MAX_INTERVAL 80
	Maximum connection event interval ( in 1.25 msec)

#define	WICED_BT_CFG_DEFAULT_CONN_LATENCY 0
	Connection latency (in number of LL connection events)

#define	WICED_BT_CFG_DEFAULT_CONN_SUPERVISION_TIMEOUT 700
	Connection link supervision timeout (in 10 msec)

#define	WICED_BT_CFG_DEFAULT_HIGH_DUTY_ADV_MIN_INTERVAL 48
	Tgap(adv_fast_interval1) = 48 *0.625 = 30ms.

#define	WICED_BT_CFG_DEFAULT_HIGH_DUTY_ADV_MAX_INTERVAL 48
	Tgap(adv_fast_interval1) = 48 *0.625 = 30ms.

#define	WICED_BT_CFG_DEFAULT_LOW_DUTY_ADV_MIN_INTERVAL 2048
	Tgap(adv_slow_interval) = 2048 * 0.625 = 1.28s.

#define	WICED_BT_CFG_DEFAULT_LOW_DUTY_ADV_MAX_INTERVAL 2048
	Tgap(adv_slow_interval) = 2048 * 0.625 = 1.28s.

#define	WICED_BT_CFG_DEFAULT_HIGH_DUTY_NONCONN_ADV_MIN_INTERVAL 160
	Tgap(adv_fast_interval2) = 160 * 0.625 = 100 ms.

#define	WICED_BT_CFG_DEFAULT_HIGH_DUTY_NONCONN_ADV_MAX_INTERVAL 160
	Tgap(adv_fast_interval2) = 160 * 0.625 = 100 ms.

#define	WICED_BT_CFG_DEFAULT_LOW_DUTY_NONCONN_ADV_MIN_INTERVAL 2048
	Tgap(adv_slow_interval) = 2048 * 0.625 = 1.28s.

#define	WICED_BT_CFG_DEFAULT_LOW_DUTY_NONCONN_ADV_MAX_INTERVAL 2048
	Tgap(adv_slow_interval) = 2048 * 0.625 = 1.28s.

#define	WICED_BT_CFG_DEFAULT_HIGH_DUTY_DIRECTED_ADV_MIN_INTERVAL 400
	Tgap(dir_conn_adv_int_max) = 400 * 0.625 = 250 ms.

#define	WICED_BT_CFG_DEFAULT_HIGH_DUTY_DIRECTED_ADV_MAX_INTERVAL 800
	Tgap(dir_conn_adv_int_min) = 800 * 0.625 = 500 ms.

#define	WICED_BT_CFG_DEFAULT_LOW_DUTY_DIRECTED_ADV_MIN_INTERVAL 48
	Tgap(adv_fast_interval1) = 48 * 0.625 = 30 ms.

#define	WICED_BT_CFG_DEFAULT_LOW_DUTY_DIRECTED_ADV_MAX_INTERVAL 48
	Tgap(adv_fast_interval1) = 48 * 0.625 = 30 ms.

#define	WICED_BT_CFG_DEFAULT_RANDOM_ADDRESS_CHANGE_TIMEOUT 900
	default refreshment timing interval 900secs

#define	WICED_BT_CFG_DEFAULT_RANDOM_ADDRESS_NEVER_CHANGE 0
	value for disabling random address refresh

#define	WICED_BT_CFG_MAX_RANDOM_ADDRESS_CHANGE_TIMEOUT 3600
	max refreshment timing interval 3600secs

wiced_result_t	wiced_bt_stack_init (wiced_bt_management_cback_t p_bt_management_cback, const wiced_bt_cfg_settings_t p_bt_cfg_settings)
	Initialize the Bluetooth controller and stack; register callback for Bluetooth event notification. More...

wiced_result_t	wiced_bt_stack_deinit (void)
	This is a blocking call (returns after all de-initialisation procedures are complete) It is recommended that the application disconnect any outstanding connections prior to invoking this function. More...

Detailed Description

This section describes API and Data structures required to initialize and configure the BT-Stack.

Enumeration Type Documentation

enum wiced_bt_ble_advert_chnl_map_e

advertising channel map

Enumerator
BTM_BLE_ADVERT_CHNL_37	ADV channel.
BTM_BLE_ADVERT_CHNL_38	ADV channel.
BTM_BLE_ADVERT_CHNL_39	ADV channel.

enum wiced_bt_ble_scan_mode_e

Scan modes.

Enumerator
BTM_BLE_SCAN_MODE_PASSIVE	Passive scan mode.
BTM_BLE_SCAN_MODE_ACTIVE	Active scan mode.
BTM_BLE_SCAN_MODE_NONE	None.

enum wiced_bt_sec_level_e

Security Service Levels (bit fields)

Enumerator
BTM_SEC_BEST_EFFORT	BTM_SEC_BEST_EFFORT : Recommended choice for most applications, to connect to the widest range of devices. Allows stack to choose the highest level of security possible between the two devices
BTM_SEC_SC_REQUIRED	BTM_SEC_SC_REQUIRED : Can be set by applications which need to enforce secure connections. Note: If this bit is set, the stack will only allow connections to devices paired using Secure Connections
BTM_SEC_AUTH_REQUIRED	BTM_SEC_AUTH_REQUIRED - Can be set by applications which need to enforce Authentication Note: If this bit is set, the stack will only allow connections to devices paired using authentication.
BTM_SEC_SC_AUTH_REQUIRED	BTM_SEC_SC_AUTH_REQUIRED : Can be set by applications which need to enforce secure connections with MITM protection. Note: If this bit is set, the stack will only allow connections to devices paired using Secure Connections with Man In The Middle (MITM) protection

Function Documentation

wiced_result_t wiced_bt_stack_deinit ( void )

This is a blocking call (returns after all de-initialisation procedures are complete) It is recommended that the application disconnect any outstanding connections prior to invoking this function.

Returns: WICED_BT_SUCCESS : on success;
WICED_BT_ERROR : if an error occurred

int32_t wiced_bt_stack_get_dynamic_memory_size_for_config ( const wiced_bt_cfg_settings_t * p_bt_cfg_settings )

Returns the expected dynamic memory size required for the stack based on the p_bt_cfg_settings.

Parameters

[in] p_bt_cfg_settings : Bluetooth stack configuration

Returns: dynamic memory size requirements of the stack

wiced_result_t wiced_bt_stack_init	(	wiced_bt_management_cback_t *	p_bt_management_cback,
		const wiced_bt_cfg_settings_t *	p_bt_cfg_settings
	)

Initialize the Bluetooth controller and stack; register callback for Bluetooth event notification.

Parameters

[in]	p_bt_management_cback	: Callback for receiving Bluetooth management events
[in]	p_bt_cfg_settings	: Bluetooth stack configuration wiced_bt_cfg_settings_t

Returns: WICED_BT_SUCCESS : on success;
WICED_BT_FAILED : if an error occurred

Note: This API must be called before using any BT functionality.
If p_bt_cfg_settings is null, stack uses default parameters defined in wiced_bt_cfg.h
However, it is strongly recommended that applications define the configuration to appropriate values based on the application use case.


			AIROC^™ BTSDK v4.4 - Documentation

Data Structures

Typedefs

Enumerations

Functions

Bluetooth Configuration Default Values

Detailed Description

Enumeration Type Documentation

Function Documentation