wiced_hal_puart.h File Reference

List of parameters and defined functions needed to access the Peripheral Universal Asynchronous Receiver/Transmitter (PUART) driver. More...

Enumerations
enum	parity_t { PARITY_ODD, PARITY_EVEN, PARITY_NONE }
enum	stop_bit_t { STOP_BIT_1, STOP_BIT_2 }

Functions
void	wiced_hal_puart_init (void)
	Initialize the Peripheral UART interface with the default configuration parameters. More...
void	wiced_hal_puart_flow_on (void)
	Enable flow control. More...
void	wiced_hal_puart_flow_off (void)
	Disable flow control. More...
wiced_bool_t	wiced_hal_puart_select_uart_pads (uint8_t rxdPin, uint8_t txdPin, uint8_t ctsPin, uint8_t rtsPin)
	Select the TX/RX and optional CTS/RTS pins (P<pin>) for the UART hardware to use. More...
void	wiced_hal_puart_print (char *string)
	Print/send a string of characters via the TX line. More...
void	wiced_hal_puart_write (uint8_t byte)
	Print/send one byte via the TX line. More...
wiced_bool_t	wiced_hal_puart_read (uint8_t *rxByte)
	Read one byte via the RX line. More...
void	wiced_hal_puart_disable_tx (void)
	Disable transmit capability. More...
void	wiced_hal_puart_enable_tx (void)
	Enable transmit capability. More...
void	wiced_hal_puart_enable_rx (void)
	Enable receive capability (specifically, by enabling PUART RX interrupts through the MIA driver). More...
void	wiced_hal_puart_set_baudrate (uint32_t baudrate) __attribute__((deprecated("Please use wiced_hal_puart_configuration()")))
	Set the baud rate (Bd) to a value other than the default 115200 Bd. More...
void	wiced_hal_puart_synchronous_read (uint8_t *buffer, uint32_t length)
	Read in a set of bytes sequentially. More...
void	wiced_hal_puart_synchronous_write (uint8_t *buffer, uint32_t length)
	Write a set of bytes sequentially. More...
wiced_bool_t	wiced_hal_puart_rx_fifo_not_empty (void)
	Check to see if there is any data ready in the RX FIFO. More...
void	wiced_hal_puart_reset_puart_interrupt (void)
	Clears and enables PUART interrupt. More...
void	wiced_hal_puart_register_interrupt (void(*puart_rx_cbk)(void *))
	Register Interrupt handler with PUART. More...
void	wiced_hal_puart_set_watermark_level (uint32_t watermark_level)
	updates the watermark level to the received value More...
wiced_bool_t	wiced_hal_puart_configuration (uint32_t baudrate, parity_t parity, stop_bit_t stop_bit)
	updates the parity and stop bits as per received value More...

Detailed Description

List of parameters and defined functions needed to access the Peripheral Universal Asynchronous Receiver/Transmitter (PUART) driver.