Infineon Logo AIROC BTSDK v4.3 - Documentation
 
 All Data Structures Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
AIROC Audio Utilities

Data Structures

struct  wiced_bt_audio_config_buffer_t
 Audio buffer configuration structure Please refer wiced_audio_buffer_initialize API documentation for recommended size. More...
 

Typedefs

typedef void(* wiced_audio_suspend_complete_cback_t )(void)
 Audio suspend complete callback.
 
typedef void(* wiced_audio_buffer_empty_cback_t )(uint32_t total_intr_count, uint32_t total_empty_count, uint32_t consecutive_empty_count)
 Audio buffer empty callback. More...
 

Enumerations

enum  wiced_device_role_t { WICED_AUDIO_SOURCE_ROLE = 1 << 1, WICED_AUDIO_SINK_ROLE = 1 << 2, WICED_HF_ROLE = 1 << 3 }
 wiced device roles More...
 
enum  wiced_audio_route_t { AUDIO_ROUTE_I2S = 0x00, AUDIO_ROUTE_UART = 0x01, AUDIO_ROUTE_SINE = 0x02, AUDIO_ROUTE_COMPRESSED_TRANSPORT = 0x03 }
 wiced audio routes More...
 

Functions

wiced_result_t wiced_audio_buffer_initialize (wiced_bt_audio_config_buffer_t wiced_audio_cfg_pool)
 Function wiced_audio_buffer_initialize. More...
 
void wiced_audio_start (int is_master, int audio_route, uint16_t lcid, wiced_bt_a2d_sbc_cie_t *pSbc)
 Function wiced_audio_start. More...
 
void wiced_audio_stop (uint16_t lcid)
 Function wiced_audio_stop. More...
 
void wiced_audio_suspend (uint16_t lcid, wiced_audio_suspend_complete_cback_t p_cback)
 Function wiced_audio_suspend. More...
 
void wiced_audio_register_buffer_empty_cback (wiced_audio_buffer_empty_cback_t p_cback)
 Function wiced_audio_register_buffer_empty_cback. More...
 
void wiced_audio_use_sw_timing (int enable)
 Function wiced_audio_use_sw_timing. More...
 
void wiced_audio_set_sinwave (int16_t *pIn)
 Function wiced_audio_set_sinwave. More...
 

Detailed Description

Typedef Documentation

typedef void( * wiced_audio_buffer_empty_cback_t)(uint32_t total_intr_count, uint32_t total_empty_count, uint32_t consecutive_empty_count)

Audio buffer empty callback.

Callback invoked on audio buffer empty event. Registered using wiced_audio_register_buffer_empty_cback()

Parameters
total_intr_count: Total number of i2s interrupts
total_empty_count: Total number of times the audio buffer is empty
consecutive_empty_count: Number of consecutive times the audio buffer is empty, resets on receiving audio data

Enumeration Type Documentation

wiced audio routes

Enumerator
AUDIO_ROUTE_I2S 

Route the PCM Samples over I2S.

Read from I2S in case of audio source,write to I2S in case of audio sink

AUDIO_ROUTE_UART 

Route the PCM samples over transport.

Receive the audio data to be sent OTA from transport in case of audio source.Receive the audio data OTA, decode and send to transport in case of audio sink

AUDIO_ROUTE_SINE 

Route the stored sine samples over the air.

Applicable in case of audio source

AUDIO_ROUTE_COMPRESSED_TRANSPORT 

Route the compressed audio data(AVDTP media packet, including the header) over transport.

Receive the audio data OTA and send to transport. Applicable in case of audio sink

wiced device roles

Enumerator
WICED_AUDIO_SOURCE_ROLE 

Audio Source.

WICED_AUDIO_SINK_ROLE 

Audio Sink.

WICED_HF_ROLE 

Handsfree.

Function Documentation

wiced_result_t wiced_audio_buffer_initialize ( wiced_bt_audio_config_buffer_t  wiced_audio_cfg_pool)

Function wiced_audio_buffer_initialize.

Audio buffer initialization. Allocates the audio buffer and returns pointer to the audio buffer

Parameters
[in]wiced_audio_cfg_pool: Size of the audio tx buffer and codec buffer to be allocated
Returns
WICED_SUCCESS if Success, otherwise WICED_OUT_OF_HEAP_SPACE.

NOTE : Recommended audio_tx_buffer_size : If the application includes A2DP source profile, the transport buffer size shall be set to at least 8KB. In case of A2DP sink profile, set the transport buffer size (recommended size 0x1c00) if required to send the encoded/decoded data over the transport.

Recommended audio_codec_buffer_size:


| USE CASE | Recommended size | |-------------------------------------------------------------------------------—| | A2DP Source (SBC Encode) | 8KB | | A2DP Sink(SBC Decode)* | 11KB (300ms jitter buffer) + 8KB for codec | | | Total 19KB |

| MSBC (WBS CODEC)* | 13KB = 5KB(for Encoding)+ 8KB(for Decoding) |

TODO : Provide formula for calculating Jitter Buffer

In case of multiple profiles used by application simultaneously, example A2DP sink and HFP device profiles, size specified should be the maximum of the recommended value for each profile supported.

void wiced_audio_register_buffer_empty_cback ( wiced_audio_buffer_empty_cback_t  p_cback)

Function wiced_audio_register_buffer_empty_cback.

Register the callback function to be invoked on audio buffer empty event

Parameters
[in]p_cback: callback function to be invoked on audio buffer empty event
Returns
void
void wiced_audio_set_sinwave ( int16_t *  pIn)

Function wiced_audio_set_sinwave.

Used by the A2DP source to set the sine audio samples to be used in audio streaming when the audio route is set to sine.

Parameters
[in]pOut: sine audio samples
Returns
void
void wiced_audio_start ( int  is_master,
int  audio_route,
uint16_t  lcid,
wiced_bt_a2d_sbc_cie_t pSbc 
)

Function wiced_audio_start.

To start the audio streaming

Parameters
[in]is_master: If the I2S has to configured as master
[in]audio_route: Audio route to be configured. Configure as AUDIO_ROUTE_I2S if the audio source is I2S Configure as AUDIO_ROUTE_UART if the audio source is FILE Configure as AUDIO_ROUTE_SINE if the audio source is the stored sine wave
[in]lcid: lcid
[in]pSbc: SBC codec info
Returns
void
void wiced_audio_stop ( uint16_t  lcid)

Function wiced_audio_stop.

To stop the audio streaming

Parameters
[in]lcid: lcid
Returns
void
void wiced_audio_suspend ( uint16_t  lcid,
wiced_audio_suspend_complete_cback_t  p_cback 
)

Function wiced_audio_suspend.

To suspend the audio streaming

Parameters
[in]lcid: lcid
Returns
void
void wiced_audio_use_sw_timing ( int  enable)

Function wiced_audio_use_sw_timing.

Used by the A2DP source to time the audio data using software timer. Sofware timer internally uses slot timer to time the audio data. Period of the software timer is determined based on the chosen audio codec sampling frequency and the number of samples. Note: I2S interrupts are used for timing the audio data by default. Software timer can also be used for timing the audio data which can be enabled by using the API wiced_audio_use_sw_timing. Enable the software timer before invoking wiced_audio_start.

Parameters
[in]enable: enables the sw timer
Returns
void