Infineon Logo AIROC BTSDK v4.9 - Documentation
 
 All Data Structures Files Functions Variables Typedefs Enumerations Enumerator Macros Groups
Advanced Audio Distribution Profile (A2DP) Sink

Advanced Audio Distribution Profile. More...

Modules

 A2DP Helper Functions
 Advanced Audio Distribution Profile.
 
 A2DP SBC Support
 
 Audio Insertion
 Bluetooth Audio Insert Application Programming Interface.
 

Functions

wiced_result_t wiced_audio_sink_config_init (wiced_bt_a2dp_sink_audio_tuning_params_t *p_param)
 Wiced audio sink initialization. More...
 
wiced_result_t wiced_audio_sink_configure (uint16_t handle, uint32_t is_master, uint32_t audio_route, uint16_t cp_type, wiced_bt_a2dp_codec_info_t *p_codec_info)
 API to configure the sink to perform SBC decoding and to route the decoded audio data over I2S or UART on starting the streaming. More...
 
wiced_result_t wiced_audio_sink_reset (uint16_t handle)
 API to reset the sink on stopping the streaming. More...
 
wiced_result_t wiced_audio_sink_mute (wiced_bool_t enable, uint16_t ramp_ms)
 To mute/unmute the audio. More...
 
wiced_bool_t wiced_audio_set_i2s_out_sf (uint32_t out_sf)
 Function wiced_audio_set_i2s_out_sf. More...
 
uint8_t wiced_bt_a2d_set_trace_level (uint8_t new_level)
 
uint8_t wiced_bt_a2d_bits_set (uint8_t mask)
 Function wiced_bt_a2d_bits_set. More...
 
wiced_bt_a2d_status_t wiced_bt_a2d_find_service (uint16_t service_uuid, BD_ADDR bd_addr, wiced_bt_a2d_sdp_db_params_t *p_db, wiced_bt_a2d_find_cback *p_cback)
 Function wiced_bt_a2d_find_service. More...
 

Detailed Description

Advanced Audio Distribution Profile.

Function Documentation

wiced_bool_t wiced_audio_set_i2s_out_sf ( uint32_t  out_sf)

Function wiced_audio_set_i2s_out_sf.

API to configure output I2S sampling frequency

Called by the application before starting the streaming

Parameters
out_sfDesired output i2s sampling frequency (ex. 16000/32000/44100/48000)
Returns
wiced_bool_t TRUE in success case otherwise FALSE

NOTE : This API must be called before calling the API wiced_audio_sink_configure

wiced_result_t wiced_audio_sink_config_init ( wiced_bt_a2dp_sink_audio_tuning_params_t p_param)

Wiced audio sink initialization.

Parameters
p_cfgpointer to the sink config structure
Returns
wiced_result_t (WICED_BT_XXX)
wiced_result_t wiced_audio_sink_configure ( uint16_t  handle,
uint32_t  is_master,
uint32_t  audio_route,
uint16_t  cp_type,
wiced_bt_a2dp_codec_info_t p_codec_info 
)

API to configure the sink to perform SBC decoding and to route the decoded audio data over I2S or UART on starting the streaming.

Called by the application when the streaming is to be started

Parameters
handleAVDT connection handle
is_masterConfigure I2S Master/Slave
audio_route- Audio route to be used to send the decoded audio data, I2S or UART
cp_typeContent protection type. Refer AVDT_CP_TYPE defined in wiced_bt_avdt.h
p_codec_infoCodec information
Returns
wiced_result_t (WICED_BT_XXX)
wiced_result_t wiced_audio_sink_mute ( wiced_bool_t  enable,
uint16_t  ramp_ms 
)

To mute/unmute the audio.

Called by the application to mute the audio when playing the music. Application shall this function to unmute also to restart playing the music

Parameters
enable1 to mute, 0 to unmute
ramp_msramp up/down time in milli seconds
Returns
wiced_result_t (WICED_BT_XXX)
wiced_result_t wiced_audio_sink_reset ( uint16_t  handle)

API to reset the sink on stopping the streaming.

Called by the application when the streaming is stopped

Parameters
handleAVDT connection handle
Returns
wiced_result_t (WICED_BT_XXX)
uint8_t wiced_bt_a2d_bits_set ( uint8_t  mask)

Function wiced_bt_a2d_bits_set.

Check the number of bits set in a given mask (used to parse stream configuration masks)

Parameters
[in]mask: mask to check
Returns
A2D_SET_ONE_BIT, if one and only one bit is set A2D_SET_ZERO_BIT, if all bits clear A2D_SET_MULTL_BIT, if multiple bits are set
wiced_bt_a2d_status_t wiced_bt_a2d_find_service ( uint16_t  service_uuid,
BD_ADDR  bd_addr,
wiced_bt_a2d_sdp_db_params_t p_db,
wiced_bt_a2d_find_cback p_cback 
)

Function wiced_bt_a2d_find_service.

Performs Service Discovery and fetches SRC/SINK SDP Record Info. Information is returned for the first service record found on the server that matches the service UUID.There can only be one outstanding call to wiced_bt_a2d_find_service() at a time; the application must wait for the callback before it makes another call to the function.

Parameters
[in]service_uuid: Indicates SRC or SNK.
[in]bd_addr: BD address of the peer device.
[in]p_db: Pointer to the information to initialize the discovery database.
[in]p_cback: Pointer to the wiced_bt_a2d_find_service() callback function.
Returns
wiced_bt_a2d_status_t