Typedefs
typedef void	I2C_SLAVE_CALLBACK_HANDLER (uint32_t evtFlag, uint8_t *rx_PktPointer, uint16_t rx_PktLength)

Enumerations
enum	{ I2CM_SPEED_100KHZ = 233, I2CM_SPEED_400KHZ = 53, I2CM_SPEED_800KHZ = 23, I2CM_SPEED_1000KHZ = 17 }
	Enumeration of speed options. More...

enum	{ I2CM_SUCCESS, I2CM_OP_FAILED }
	Enumeration of I2C transaction return values. More...

enum	{ I2C_TRAN_EVENT_MASK_RX_DONE = 1, I2C_TRAN_EVENT_MASK_TX_DONE = 2, I2C_TRAN_EVENT_MASK_RX_STOP = 4 }

Functions
void	wiced_hal_i2c_init (void)
	Initializes the I2C driver and its private values. More...

void	wiced_hal_i2c_set_speed (uint8_t speed)
	Sets the I2C bus speed. More...

uint8_t	wiced_hal_i2c_get_speed (void)
	Gets the current I2C bus speed. More...

uint8_t	wiced_hal_i2c_read (uint8_t *data, uint16_t length, uint8_t slave)
	Reads data into given buffer from the I2C HW addressing a particular slave address. More...

uint8_t	wiced_hal_i2c_write (uint8_t *data, uint16_t length, uint8_t slave)
	Writes the given data to the I2C HW addressing a particular slave address. More...

void	wiced_hal_i2c_select_pads (uint8_t scl_pin, uint8_t sda_pin)
	Configures GPIOs to use for I2C pins. More...

uint8_t	wiced_hal_i2c_combined_read (uint8_t rx_data, uint8_t rx_data_len, uint8_t tx_data, uint16_t tx_data_len, uint8_t slave)
	Executes two transactions back-to-back with a repeated start condition between the first and the second. More...

void	wiced_hal_i2c_slave_set_device_address (UINT8 address)

void	wiced_hal_i2c_slave_select_pads (UINT32 scl_pin, UINT32 sda_pin)

void	wiced_hal_i2c_slave_init (void)

void	wiced_hal_i2c_slave_register_cb (I2C_SLAVE_CALLBACK_HANDLER *cb)

void	wiced_hal_i2c_slave_synchronous_write (UINT8 *buffer, UINT32 length)

Detailed Description

>

List of parameters and defined functions needed to access the Inter-Integrated Circuit (I2C, IIC) driver.

Typedefs