 |
AIROC™ BTSDK v4.9 - Documentation | |||
|
AIROC™ BTSDK v4.9 - Documentation | |||
Mesh event structure is exchanged between the app and the mesh models library. More...
Data Fields | |
| struct wiced_bt_mesh_event__t * | p_next |
| Pointer to the next event in the queue. | |
| void * | complete_callback |
| pointer to the send complete callback | |
| uint16_t | company_id |
| Company ID for the Model ID. | |
| uint16_t | model_id |
| Model ID. | |
| uint16_t | opcode |
| Opcode of the message to be transmitted or that has been received. | |
| uint16_t | hci_opcode |
| HCI Opcode received of the message from the MCU being processed. | |
| uint8_t | element_idx |
| Element Index of the source or destination of the message. | |
| uint8_t | ttl |
| Time to leave to be used when transmitting or as received from the peer. | |
| uint16_t | src |
| Address of the source mesh node. | |
| uint16_t | dst |
| Address of the destination mesh node. | |
| uint16_t | app_key_idx |
| Application key index used to decrypt when message was received or which should be used to encrypt to send the message. | |
| uint16_t | data_len |
| Length of data corresponding to the event. | |
| uint8_t | credential_flag |
| One of the CREDENTIAL_FLAG_XXX value. More... | |
| uint8_t | retrans_cnt |
| Number of retransmissions for each message. More... | |
| uint8_t | retrans_time |
| Interval between retransmissions in 50-millisecond steps. More... | |
| uint8_t | reply |
| If TRUE the reply is expected. | |
| uint8_t | reply_timeout |
| Time to wait for the peer model layer acknowledgment in 50-millisecond steps. | |
| union { | |
| uint8_t tx_flag | |
| Transmission failed or timeout occurred waiting for peer reply. | |
| uint8_t rpl_delay | |
| Model indicates how SEQ shall be saved by the core. More... | |
| uint8_t tx_delay | |
| If this value is not 0, wiced_bt_mesh_core_send() will delay sending of the event by this number of milliseconds. More... | |
| } | status |
| uint8_t | flags |
| uint16_t | friend_addr |
| core sets it to friend address when calls complete_callback if segmented message has been sent and acked by the friend OnBehalfOf LPN. More... | |
| uint8_t | send_segmented |
| if non-0 then core uses segmentation to send that message even if it fits into unsegmented message. More... | |
| int8_t | rssi |
| RSSI of the received message. | |
| wiced_timer_t | timer |
Mesh event structure is exchanged between the app and the mesh models library.
| uint8_t credential_flag |
One of the CREDENTIAL_FLAG_XXX value.
It comes from publication or credentials of the received message
| uint16_t friend_addr |
core sets it to friend address when calls complete_callback if segmented message has been sent and acked by the friend OnBehalfOf LPN.
Otherwise it is 0
| uint8_t retrans_cnt |
Number of retransmissions for each message.
Should be <= 0x7f. It is ignored using 0 value or if it is reply (reply == WICED_TRUE). If bit 0x80 is set, the retransmission count and time applies to number of network rexmits, no access layer rexmits, the time is in 10ms ticks The number of transmissions is the retrans_cnt + 1. The transmission interval = (retrans_time + 1) * 10
| uint8_t retrans_time |
Interval between retransmissions in 50-millisecond steps.
If bit 0x80 of the retrans_cnt is set then The transmission interval = (retrans_time + 1) * 10
| uint8_t rpl_delay |
Model indicates how SEQ shall be saved by the core.
It is delay in seconds to save SEQ in RPL. 0-save immediatly; 0xff - don't save;
| uint8_t send_segmented |
if non-0 then core uses segmentation to send that message even if it fits into unsegmented message.
| uint8_t tx_delay |
If this value is not 0, wiced_bt_mesh_core_send() will delay sending of the event by this number of milliseconds.
