wiced_bt_a2dp_sink_audio_tuning_params_t Struct Reference

Audio quality tuning parameters Note. More...

Data Fields
uint16_t	buf_depth_ms
uint8_t	start_buf_depth
uint8_t	target_buf_depth
wiced_bt_a2dp_sink_overrun_control_t	overrun_control
int32_t	adj_ppm_max
int32_t	adj_ppm_min
int32_t	adj_ppb_per_msec
int32_t	lvl_correction_threshold_high
int32_t	lvl_correction_threshold_low
int32_t	adj_proportional_gain
int32_t	adj_integral_gain

Detailed Description

Audio quality tuning parameters Note.

The average buffer level, over a period of time, is compared to the target buffer level (calculated based on the Target BUF Depth %) and used to compute the necessary clock adjustment in ppm (Level Correction). If the Level Correction stays within the ppm range defined by Level Correction Threshold High and Level Correction Threshold Low, then the algorithm only applies small clock adjustments that are proportional to the amplitude of the Level Correction (typically, 1.5%~2.0% of the Level Correction value). Otherwise, if the Level Correction falls outside of the Level Correction Threshold High and Level Correction Threshold Low interval for 3 successive adjustment periods, the algorithm applies large clock adjustments defined Adjustment ppm Max or Adjustment ppm Min in an effort to get back within range

---

The documentation for this struct was generated from the following file:

• wiced_bt_a2dp_defs.h