Pins

General Description

Pin mapping of the GPIOs used by shield peripherals.

Macros
#define	CY8CKIT_028_EPD_PIN_DISPLAY_SPI_MOSI   (CYBSP_D11)
	Pin for the E-Ink SPI MOSI signal.
#define	CY8CKIT_028_EPD_PIN_DISPLAY_SPI_MISO   (CYBSP_D12)
	Pin for the E-Ink SPI MISO signal.
#define	CY8CKIT_028_EPD_PIN_DISPLAY_SPI_SCLK   (CYBSP_D13)
	Pin for the E-Ink SPI SCLK signal.
#define	CY8CKIT_028_EPD_PIN_DISPLAY_CS   (CYBSP_D10)
	Pin for the E-Ink SPI Cable Select signal.
#define	CY8CKIT_028_EPD_PIN_DISPLAY_RST   (CYBSP_D2)
	Pin for the E-Ink Display Reset signal.
#define	CY8CKIT_028_EPD_PIN_DISPLAY_BUSY   (CYBSP_D3)
	Pin for the E-Ink Display Busy signal.
#define	CY8CKIT_028_EPD_PIN_DISPLAY_DISCHARGE   (CYBSP_D5)
	Pin for the E-Ink Display Discharge signal.
#define	CY8CKIT_028_EPD_PIN_DISPLAY_EN   (CYBSP_D4)
	Pin for the E-Ink Display Enable signal.
#define	CY8CKIT_028_EPD_PIN_DISPLAY_BORDER   (CYBSP_D6)
	Pin for the E-Ink Display Border signal.
#define	CY8CKIT_028_EPD_PIN_DISPLAY_IOEN   (CYBSP_D7)
	Pin for the E-Ink Display IO Enable signal.
#define	CY8CKIT_028_EPD_PIN_THERM_VDD   (CYBSP_A0)
	Pin for the Thermistor VDD signal.
#define	CY8CKIT_028_EPD_PIN_THERM_OUT1   (CYBSP_A1)
	Pin for the Thermistor Output option1 signal.
#define	CY8CKIT_028_EPD_PIN_THERM_OUT2   (CYBSP_A2)
	Pin for the Thermistor Output option2 signal.
#define	CY8CKIT_028_EPD_PIN_THERM_GND   (CYBSP_A3)
	Pin for the Thermistor Ground signal.
#define	CY8CKIT_028_EPD_PIN_IMU_I2C_SCL   (CYBSP_I2C_SCL)
	Pin for the Accelerometer & Gyroscope I2C SCL signal.
#define	CY8CKIT_028_EPD_PIN_IMU_I2C_SDA   (CYBSP_I2C_SDA)
	Pin for the Accelerometer & Gyroscope I2C SDA signal.
#define	CY8CKIT_028_EPD_PIN_IMU_INT_1   (CYBSP_D9)
	Pin for the Accelerometer & Gyroscope Interrupt1 signal.
#define	CY8CKIT_028_EPD_PIN_IMU_INT_2   (CYBSP_D8)
	Pin for the Accelerometer & Gyroscope Interrupt2 signal.
#define	CY8CKIT_028_EPD_PIN_PDM_CLK   (CYBSP_A4)
	Pin for the PDM Clock.
#define	CY8CKIT_028_EPD_PIN_PDM_DATA   (CYBSP_A5)
	Pin for the PDM Data.