Enumerated Types

General Description

Enumerations
enum	mtb_pmbus_ctrl_status_t {   MTB_PMBUS_CTRL_STATUS_SUCCESS = CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_MIDDLEWARE_PMBUS, 0U) ,   MTB_PMBUS_CTRL_STATUS_BAD_PARAM = CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_MIDDLEWARE_PMBUS, 1U) ,   MTB_PMBUS_CTRL_STATUS_IS_BUSY = CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_MIDDLEWARE_PMBUS, 2U) ,   MTB_PMBUS_CTRL_STATUS_IS_READY = CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_MIDDLEWARE_PMBUS, 3U) ,   MTB_PMBUS_CTRL_STATUS_UNKNOWN_ERR = CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_MIDDLEWARE_PMBUS, 4U) ,   MTB_PMBUS_CTRL_STATUS_BUS_IS_BUSY = CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_MIDDLEWARE_PMBUS, 5U) ,   MTB_PMBUS_CTRL_STATUS_TIMEOUT = CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_MIDDLEWARE_PMBUS, 6U) ,   MTB_PMBUS_CTRL_STATUS_TRANSFER_ERR = CY_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_MIDDLEWARE_PMBUS, 7U) }
	Controller statuses. More...
enum	mtb_pmbus_ctrl_events_t {   MTB_PMBUS_CTRL_TRANSFER_DONE = 0U ,   MTB_PMBUS_CTRL_CORRUPTED_DATA = 1U ,   MTB_PMBUS_CTRL_TARGET_NACK_ADDR = 2U ,   MTB_PMBUS_CTRL_BUS_ERR = 3U ,   MTB_PMBUS_CTRL_TIMEOUT = 4U ,   MTB_PMBUS_CTRL_TARGET_NACK_BYTE = 5U ,   MTB_PMBUS_CTRL_TARGET_NACK_CMD = 6U ,   MTB_PMBUS_CTRL_ARB_LOST = 7U ,   MTB_PMBUS_CTRL_ABORT_START = 8U ,   MTB_PMBUS_CTRL_BLOCK_COUNT_TOO_BIG = 9U }
	Controller events. More...
enum	mtb_pmbus_ctrl_host_notify_events_t {   MTB_PMBUS_CTRL_HOST_NOTIFY_COMPLETE = 0U ,   MTB_PMBUS_CTRL_HOST_NOTIFY_REQUEST_RECEIVED = 1U ,   MTB_PMBUS_CTRL_HOST_NOTIFY_ERROR = 2U }
	Host Notify events. More...
enum	mtb_pmbus_ctrl_hw_resources_ctrl_action_t {   MTB_PMBUS_CTRL_HW_RESOURCES_INIT = 0U ,   MTB_PMBUS_CTRL_HW_RESOURCES_ENABLE = 1U ,   MTB_PMBUS_CTRL_HW_RESOURCES_DISABLE = 2U }
	Events for HW initialization. More...

Enumeration Type Documentation

mtb_pmbus_ctrl_status_t

enum mtb_pmbus_ctrl_status_t

Controller statuses.

Enumerator
MTB_PMBUS_CTRL_STATUS_SUCCESS	Correct status, No error.
MTB_PMBUS_CTRL_STATUS_BAD_PARAM	The provided command code is incorrect.
MTB_PMBUS_CTRL_STATUS_IS_BUSY	The controller is busy.
MTB_PMBUS_CTRL_STATUS_IS_READY	The controller is ready to send data.
MTB_PMBUS_CTRL_STATUS_UNKNOWN_ERR	The unknown error.
MTB_PMBUS_CTRL_STATUS_BUS_IS_BUSY	The I2C Bus is busy.
MTB_PMBUS_CTRL_STATUS_TIMEOUT	Timeout.
MTB_PMBUS_CTRL_STATUS_TRANSFER_ERR	The last transfer finished with an error. The controller is ready to send data

mtb_pmbus_ctrl_events_t

enum mtb_pmbus_ctrl_events_t

Controller events.

Enumerator
MTB_PMBUS_CTRL_TRANSFER_DONE	The Transfer is completed.
MTB_PMBUS_CTRL_CORRUPTED_DATA	The incorrect PEC is received.
MTB_PMBUS_CTRL_TARGET_NACK_ADDR	The Target sends NACK to Address.
MTB_PMBUS_CTRL_BUS_ERR	A bus error occurred on the I2C bus.
MTB_PMBUS_CTRL_TIMEOUT	A timeout is detected.
MTB_PMBUS_CTRL_TARGET_NACK_BYTE	Target sends NACK to the data byte.
MTB_PMBUS_CTRL_TARGET_NACK_CMD	Target sends NACK to the command code.
MTB_PMBUS_CTRL_ARB_LOST	Controller arbitration lost.
MTB_PMBUS_CTRL_ABORT_START	Controller abort starts.
MTB_PMBUS_CTRL_BLOCK_COUNT_TOO_BIG	The received block count is too big.

mtb_pmbus_ctrl_host_notify_events_t

enum mtb_pmbus_ctrl_host_notify_events_t

Host Notify events.

Note

This enum is only available when MTB_PMBUS_CTRL_SUPPORT_HOST_NOTIFY is enabled at compile time options.

Enumerator
MTB_PMBUS_CTRL_HOST_NOTIFY_COMPLETE	The Host Notify transfer successful complete.
MTB_PMBUS_CTRL_HOST_NOTIFY_REQUEST_RECEIVED	The Host Notify request received.
MTB_PMBUS_CTRL_HOST_NOTIFY_ERROR	An error occurred during Host Notify transfer.

mtb_pmbus_ctrl_hw_resources_ctrl_action_t

enum mtb_pmbus_ctrl_hw_resources_ctrl_action_t

Events for HW initialization.

Enumerator
MTB_PMBUS_CTRL_HW_RESOURCES_INIT	Initialize the HW resources.
MTB_PMBUS_CTRL_HW_RESOURCES_ENABLE	Enable the I2C HW.
MTB_PMBUS_CTRL_HW_RESOURCES_DISABLE	Disable the I2C HW.