Hardware Abstraction Layer (HAL)
Macros
SDIO HAL Results
HAL Drivers » SDIO (Secure Digital Input Output) | HAL General Types/Macros » General Types » Result Codes

General Description

SDIO specific return codes.

Macros

#define CYHAL_SDIO_RSLT_ERR_BAD_PARAM    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 0))
 Incorrect parameter value define.
 
#define CYHAL_SDIO_RSLT_CANCELED    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 1))
 Define to indicate canceled operation.
 
#define CYHAL_SDIO_RSLT_ERR_PM_PENDING    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 2))
 Transfers are not allowed after the SDIO block has allowed power mode transition.
 
#define CYHAL_SDIO_RSLT_ERR_UNSUPPORTED    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 3))
 Requested feature is not supported on this hardware.
 
#define CYHAL_SDIO_RSLT_ERR_COMMAND_SEND    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 4))
 Failure in command send.
 
#define CYHAL_SDIO_RSLT_ERR_CONFIG    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 5))
 SDIO Configuration error.
 
#define CYHAL_SDIO_RSLT_ERR_IO_VOLT_SEL_PIN_CONFIGURED    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 6))
 Another SDIO IO volt select pin already configured.
 
#define CYHAL_SDIO_RSLT_ERR_IO_VOLT_SWITCH_SEQ    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 7))
 Error occured during I/O voltage switch sequence.
 
#define CYHAL_SDIO_RSLT_ERR_CLOCK    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 8))
 Clock initialization error define.
 
#define CYHAL_SDIO_DEV_RSLT_WRITE_ERROR    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 1 << 4))
 Failed to write SDIO Device data.
 
#define CYHAL_SDIO_DEV_RSLT_READ_ERROR    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 2 << 4))
 Failed to read SDIO Device data.
 
#define CYHAL_SDIO_DEV_RSLT_MAILBOX_WRITE_ERROR    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 3 << 4))
 Failed to write SDIO Device mailbox data.
 
#define CYHAL_SDIO_DEV_RSLT_MAILBOX_READ_ERROR    (CY_RSLT_CREATE_EX(CY_RSLT_TYPE_ERROR, CY_RSLT_MODULE_ABSTRACTION_HAL, CYHAL_RSLT_MODULE_SDIO, 4 << 4))
 Failed to read SDIO Device mailbox data.