 |
CY8CKIT-062-BLE BSP
|
|
CY8CKIT-062-BLE BSP
|
| Resource | Parameter | Value | Remarks |
|---|---|---|---|
| ADC | VREF | 1.2 V | |
| Measurement type | Single Ended | ||
| Input voltage range | 0 to 2.4 V (0 to 2*VREF) | ||
| Output range | 0x000 to 0x7FF | ||
| DAC | Reference source | VDDA | |
| Input range | 0x000 to 0xFFF | ||
| Output range | 0 to VDDA | ||
| Output type | Unbuffered output | ||
| I2C | Role | Master | Configurable to slave mode through HAL function |
| Data rate | 100 kbps | Configurable through HAL function | |
| Drive mode of SCL & SDA pins | Open Drain (drives low) | External pull-up resistors are required | |
| LpTimer | Uses WCO (32.768 kHz) as clock source & MCWDT as counter; 1 count = 1/32768 second or 32768 counts = 1 second | ||
| SPI | Data rate | 100 kpbs | Configurable through HAL function |
| Slave select polarity | Active low | ||
| UART | Flow control | No flow control | Configurable through HAL function |
| Data format | 8N1 | Configurable through HAL function | |
| Baud rate | 115200 | Configurable through HAL function | |
| OPAMP,COMP | Pin (P9_3) | Always 0 V | R131 is not soldered by default |
| LPCOMP | Pins (P8_2, P8_3) | Always 0 V | R103, R99 are not soldered by default |
© Cypress Semiconductor Corporation, 2019-2022.